Hello Chintan,
On 25/01/24 15:34, Chintan Vankar wrote:
> From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
>
...
>
> + main_cpsw0: ethernet@c000000 {
> + compatible = "ti,j784s4-cpswxg-nuss";
> + reg = <0x00 0xc000000 0x00 0x200000>;
> + reg-names = "cpsw_nuss";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>;
> + dma-coherent;
> + clocks = <&k3_clks 64 0>;
> + clock-names = "fck";
> + power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
> +
> + dmas = <&main_udmap 0xca00>,
> + <&main_udmap 0xca01>,
> + <&main_udmap 0xca02>,
> + <&main_udmap 0xca03>,
> + <&main_udmap 0xca04>,
> + <&main_udmap 0xca05>,
> + <&main_udmap 0xca06>,
> + <&main_udmap 0xca07>,
> + <&main_udmap 0x4a00>;
> + dma-names = "tx0", "tx1", "tx2", "tx3",
> + "tx4", "tx5", "tx6", "tx7",
> + "rx";
> +
> + status = "disabled";
> +
> + ethernet-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + main_cpsw0_port1: port@1 {
> + reg = <1>;
> + label = "port1";
> + ti,mac-only;
> + status = "disabled";
> + };
> +
> + main_cpsw0_port2: port@2 {
> + reg = <2>;
> + label = "port2";
> + ti,mac-only;
> + status = "disabled";
> + };
> +
> + main_cpsw0_port3: port@3 {
> + reg = <3>;
> + label = "port3";
> + ti,mac-only;
> + status = "disabled";
> + };
> +
> + main_cpsw0_port4: port@4 {
> + reg = <4>;
> + label = "port4";
> + ti,mac-only;
> + status = "disabled";
> + };
> +
> + main_cpsw0_port5: port@5 {
> + reg = <5>;
> + label = "port5";
Please add the "ti,mac-only" property here and in the following 3 nodes as well
to keep it consistent.
> + status = "disabled";
> + };
> +
> + main_cpsw0_port6: port@6 {
> + reg = <6>;
> + label = "port6";
> + status = "disabled";
> + };
> +
> + main_cpsw0_port7: port@7 {
> + reg = <7>;
> + label = "port7";
> + status = "disabled";
> + };
> +
> + main_cpsw0_port8: port@8 {
> + reg = <8>;
> + label = "port8";
> + status = "disabled";
> + };
> + };
> +
...
--
Regards,
Siddharth.
