"usb-phy" has multiple type definitions. Unify the type with the looser definition, phandle-array, as there are cases with multiple entries (USB2 and USB3). However, the 'phandle-array' type alone is a bit ambiguous. It can be either just an array of phandles or an array of phandles plus args. "usb-phy" is the former and needs to constrain each entry to a single phandle value. Signed-off-by: Rob Herring <robh@xxxxxxxxxx> --- Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml | 2 +- Documentation/devicetree/bindings/usb/usb.yaml | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index b7e664f7395b..3b56e0edb1c6 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -313,7 +313,7 @@ properties: usb-phy: description: phandle for the PHY device. Use "phys" instead. - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 deprecated: true fsl,usbphy: diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml index 326b14f05d1c..1761b7aa92f0 100644 --- a/Documentation/devicetree/bindings/usb/usb.yaml +++ b/Documentation/devicetree/bindings/usb/usb.yaml @@ -25,6 +25,8 @@ properties: usb-phy: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: List of all the USB PHYs on this HCD to be accepted by the legacy USB Physical Layer subsystem. -- 2.43.0