To do this we convert hbmc-mux to "reg-mux", then the FSS node does not need to be a syscon, so change to "simple-bus". This removes a DTS check warning. Signed-off-by: Andrew Davis <afd@xxxxxx> --- arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 60b26374ae0cc..d501bd5f02248 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -518,17 +518,18 @@ mcu_spi2: spi@40320000 { status = "disabled"; }; - fss: syscon@47000000 { - compatible = "syscon", "simple-mfd"; + fss: bus@47000000 { + compatible = "simple-bus"; reg = <0x00 0x47000000 0x00 0x100>; #address-cells = <2>; #size-cells = <2>; ranges; - hbmc_mux: hbmc-mux { - compatible = "mmio-mux"; + hbmc_mux: mux-controller@47000004 { + compatible = "reg-mux"; + reg = <0x00 0x47000004 0x00 0x4>; #mux-control-cells = <1>; - mux-reg-masks = <0x4 0x2>; /* HBMC select */ + mux-reg-masks = <0x0 0x2>; /* HBMC select */ }; hbmc: hyperbus@47034000 { -- 2.39.2