This node is an example node for the PCIe controller in "endpoint" mode.
By default the controller is in "root complex" mode and there is already a
DT node for the same.
Examples should go in the bindings or other documentation.
Remove this node.
Signed-off-by: Andrew Davis <afd@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 19 -------------------
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 6 ------
2 files changed, 25 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index e348114f42e01..d5938f966a2dd 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -1041,25 +1041,6 @@ pcie0_rc: pcie@f102000 {
status = "disabled";
};
- pcie0_ep: pcie-ep@f102000 {
- compatible = "ti,am64-pcie-ep", "ti,j721e-pcie-ep";
- reg = <0x00 0x0f102000 0x00 0x1000>,
- <0x00 0x0f100000 0x00 0x400>,
- <0x00 0x0d000000 0x00 0x00800000>,
- <0x00 0x68000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
- max-link-speed = <2>;
- num-lanes = <1>;
- power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 114 0>;
- clock-names = "fck";
- max-functions = /bits/ 8 <1>;
- status = "disabled";
- };
-
epwm0: pwm@23000000 {
compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
#pwm-cells = <3>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 8c5651d2cf5dd..6412c52c8001a 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -705,12 +705,6 @@ &pcie0_rc {
num-lanes = <1>;
};
-&pcie0_ep {
- phys = <&serdes0_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <1>;
-};
-
&ecap0 {
status = "okay";
/* PWM is available on Pin 1 of header J12 */
--
2.39.2
