These clocks are needed so that OMAP HWMOD can
control them when we're using performance
monitors.
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
arch/arm/boot/dts/am43xx-clocks.dtsi | 51 ++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index c7dc9dab93a4..9000a5c5b719 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -362,6 +362,57 @@
clock-div = <1>;
};
+ dbg_sysclk_ck: dbg_sysclk_ck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&sys_clkin_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x20>;
+ };
+
+ dbg_clka_ck: dbg_clka_ck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&sys_clkin_ck>;
+ ti,bit-shift = <9>;
+ reg = <0x20>;
+ };
+
+ dbg_clkb_ck: dbg_clkb_ck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&sys_clkin_ck>;
+ ti,bit-shift = <10>;
+ reg = <0x20>;
+ };
+
+ dbg_clkc_ck: dbg_clkc_ck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&sys_clkin_ck>;
+ ti,bit-shift = <11>;
+ reg = <0x20>;
+ };
+
+ trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>,
+ <&dbg_clkb_ck>, <&dbg_clkc_ck>;
+ ti,bit-shift = <22>;
+ reg = <0x20>;
+ };
+
+ trace_clk_div_ck: trace_clk_div_ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&trace_pmd_clk_mux_ck>;
+ ti,bit-shift = <24>;
+ ti,max-div = <4>;
+ reg = <0x20>;
+ ti,index-power-of-two;
+ };
+
pruss_ocp_gclk: pruss_ocp_gclk {
#clock-cells = <0>;
compatible = "ti,mux-clock";
--
2.3.0-rc1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
