From: Hiago De Franco <hiago.franco@xxxxxxxxxxx> This patch series introduces support for the new Apalis Evaluation Board v1.2. With the introduction of v1.2, a common dtsi file, containing shared configurations for both apalis-eval.dts and apalis-eval-v1.2.dts, has been created. The eval and eval-v1.2 dts files will now capture the differences between these two boards. Additionally, updates have been made to nxp/imx/Makefile and arm/fsl.yaml to accommodate these changes. v1: - https://lore.kernel.org/all/20240122123526.43400-1-hiagofranco@xxxxxxxxx/ v2: - Add missing off-on-delay-us property with 100ms to reg_3v3_mmc and reg_3v3_sd. - Fix startup-delay-us property from 100us (reg_3v3_mmc and reg_3v3_sd) and 1ms (reg_can1 and reg_can2) to 10ms. - Fix pinctrl mux from 0xb000 to 0x1b0b0. - Add Acked-by: Conor Dooley. - Add Reviewed-by: Francesco Dolcini. Hiago De Franco (2): dt-bindings: arm: fsl: Add toradex,apalis_imx6q-eval-v1.2 board arm: dts: nxp: imx: Add support for Apalis Evaluation Board v1.2 .../devicetree/bindings/arm/fsl.yaml | 3 +- arch/arm/boot/dts/nxp/imx/Makefile | 1 + .../dts/nxp/imx/imx6q-apalis-eval-v1.2.dts | 200 ++++++++++++++++++ .../boot/dts/nxp/imx/imx6q-apalis-eval.dts | 108 +--------- .../boot/dts/nxp/imx/imx6q-apalis-eval.dtsi | 120 +++++++++++ 5 files changed, 325 insertions(+), 107 deletions(-) create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi -- 2.43.0
