Add aliases for all ethernet nodes including the switch. It makes it
easier to find this nodes by the boot loader.
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
index 2731faede1cb..d59d5d0e1d19 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
@@ -13,10 +13,14 @@ chosen {
aliases {
can0 = &can1;
can1 = &can2;
+ ethernet0 = &fec;
+ ethernet1 = &lan1;
+ ethernet2 = &lan2;
mdio-gpio0 = &mdio;
nand = &gpmi;
rtc0 = &i2c_rtc;
rtc1 = &snvs;
+ switch0 = &switch;
usb0 = &usbh1;
usb1 = &usbotg;
};
@@ -60,7 +64,7 @@ mdio: mdio {
gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
<&gpio1 22 GPIO_ACTIVE_HIGH>;
- switch@0 {
+ switch: switch@0 {
compatible = "microchip,ksz8873";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_switch>;
@@ -73,13 +77,13 @@ ports {
#address-cells = <1>;
#size-cells = <0>;
- ports@0 {
+ lan1: ports@0 {
reg = <0>;
phy-mode = "internal";
label = "lan1";
};
- ports@1 {
+ lan2: ports@1 {
reg = <1>;
phy-mode = "internal";
label = "lan2";
--
2.39.2
