UART nodes are present in the platform devicetree. Add pinctrl to them
now that the pin controller is supported.
Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
---
arch/mips/boot/dts/mobileye/eyeq5.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 05987c58ed73..bf06d7a801a2 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -79,6 +79,8 @@ uart0: serial@800000 {
clocks = <&uart_clk>, <&occ_periph>;
clock-names = "uartclk", "apb_pclk";
resets = <&reset 0 10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
};
uart1: serial@900000 {
@@ -90,6 +92,8 @@ uart1: serial@900000 {
clocks = <&uart_clk>, <&occ_periph>;
clock-names = "uartclk", "apb_pclk";
resets = <&reset 0 11>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
};
uart2: serial@a00000 {
@@ -101,6 +105,8 @@ uart2: serial@a00000 {
clocks = <&uart_clk>, <&occ_periph>;
clock-names = "uartclk", "apb_pclk";
resets = <&reset 0 12>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
};
olb: system-controller@e00000 {
--
2.43.0
