Re: [PATCH 1/2] dt-bindings: usb: dwc3: Add system bus request info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 23, 2024 at 05:27:13PM +0000, Conor Dooley wrote:
> On Tue, Jan 23, 2024 at 12:02:05PM -0500, Frank Li wrote:
> > Add device tree binding allow platform overwrite default value of *REQIN in
> > GSBUSCFG0.
> 
> Why might a platform actually want to do this? Why does this need to be
> set at the board level and being aware of which SoC is in use is not
> sufficient for the driver to set the correct values?

In snps,dwc3.yaml, there are already similary proptery, such as
snps,incr-burst-type-adjustment. Use this method can keep whole dwc3 usb
driver keep consistent. And not all platform try enable hardware
dma_cohenrence. It is configable for difference platform.

Frank

> 
> Thanks,
> Conor.
> 
> > 
> > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > ---
> >  .../devicetree/bindings/usb/snps,dwc3.yaml    | 36 +++++++++++++++++++
> >  1 file changed, 36 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> > index 8f5d250070c78..43e7fea3f6798 100644
> > --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> > +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> > @@ -439,6 +439,42 @@ properties:
> >      items:
> >        enum: [1, 4, 8, 16, 32, 64, 128, 256]
> >  
> > +  snps,des-wr-reqinfo:
> > +    description: Value for DESEWRREQIN of GSBUSCFG0 register.
> > +      ----------------------------------------------------------------
> > +       MBUS_TYPE| bit[3]       |bit[2]       |bit[1]     |bit[0]
> > +      ----------------------------------------------------------------
> > +       AHB      |Cacheable     |Bufferable   |Privilegge |Data
> > +       AXI3     |Write Allocate|Read Allocate|Cacheable  |Bufferable
> > +       AXI4     |Allocate Other|Allocate     |Modifiable |Bufferable
> > +       AXI4     |Other Allocate|Allocate     |Modifiable |Bufferable
> > +       Native   |Same as AXI   |Same as AXI  |Same as AXI|Same as AXI
> > +      ----------------------------------------------------------------
> > +      The AHB, AXI3, AXI4, and PCIe busses use different names for certain
> > +      signals, which have the same meaning:
> > +      Bufferable = Posted
> > +      Cacheable = Modifiable = Snoop (negation of No Snoop)
> > +    $ref: /schemas/types.yaml#/definitions/uint8
> > +    maxItem: 15
> > +
> > +  snps,des-rd-reqinfo:
> > +    description: Value for DESRDREQIN of GSBUSCFG0 register. ref
> > +      snps,des-wr-reqinfo
> > +    $ref: /schemas/types.yaml#/definitions/uint8
> > +    maxItem: 15
> > +
> > +  snps,dat-wr-reqinfo:
> > +    description: Value for DATWRREQIN of GSBUSCFG0 register. ref
> > +      snps,des-wr-reqinfo
> > +    $ref: /schemas/types.yaml#/definitions/uint8
> > +    maxItem: 15
> > +
> > +  snps,des-wr-reqinfo:
> > +    description: Value for DATWRREQIN of GSBUSCFG0 register. ref
> > +      snps,des-wr-reqinfo
> > +    $ref: /schemas/types.yaml#/definitions/uint8
> > +    maxItem: 15
> > +
> >    num-hc-interrupters:
> >      maximum: 8
> >      default: 1
> > -- 
> > 2.34.1
> > 






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux