[PATCH 4/5] arm64: dts: renesas: rzg2ul-smarc: Enable CRU, CSI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable CRU, CSI on RZ/G2UL SMARC EVK and tie the CSI to the OV5645 sensor
using Device Tree overlay.

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/Makefile          |  2 ++
 .../r9a07g043u11-smarc-cru-csi-ov5645.dtso    | 21 +++++++++++++++++++
 2 files changed, 23 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 8ea68d582710..f46d6f0b26ab 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -104,6 +104,8 @@ dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs-panel-aa104xd12.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb
 dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo
+r9a07g043u11-smarc-cru-csi-ov5645-dtbs := r9a07g043u11-smarc.dtb r9a07g043u11-smarc-cru-csi-ov5645.dtbo
+dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-cru-csi-ov5645.dtb
 r9a07g043u11-smarc-pmod-dtbs := r9a07g043u11-smarc.dtb r9a07g043-smarc-pmod.dtbo
 dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-pmod.dtb
 
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso
new file mode 100644
index 000000000000..b41bb4b31a26
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree overlay for the RZ/G2UL SMARC EVK with OV5645 camera
+ * connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+#define OV5645_PARENT_I2C i2c0
+#include "rz-smarc-cru-csi-ov5645.dtsi"
+
+&ov5645 {
+	enable-gpios = <&pinctrl RZG2L_GPIO(4, 4) GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&pinctrl RZG2L_GPIO(0, 1) GPIO_ACTIVE_LOW>;
+};
-- 
2.25.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux