On 1/23/2024 2:21 PM, Neil Armstrong wrote:
The qlink_logging memory region is also used by the modem firmware,
add it to the reserved memories and add it to the MPSS memory regions.
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
LGTM,
Reviewed-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
-Mukesh
---
arch/arm64/boot/dts/qcom/sm8650.dtsi | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 2df77123a8c7..7a1cbc823306 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -525,6 +525,11 @@ qdss_mem: qdss@82800000 {
no-map;
};
+ qlink_logging_mem: qlink-logging@84800000 {
+ reg = <0 0x84800000 0 0x200000>;
+ no-map;
+ };
+
mpss_dsm_mem: mpss-dsm@86b00000 {
reg = <0 0x86b00000 0 0x4900000>;
no-map;
@@ -2627,7 +2632,8 @@ remoteproc_mpss: remoteproc@4080000 {
"mss";
memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
- <&mpss_dsm_mem>, <&mpss_dsm_mem_2>;
+ <&mpss_dsm_mem>, <&mpss_dsm_mem_2>,
+ <&qlink_logging_mem>;
qcom,qmp = <&aoss_qmp>;
