The sdmmc0 controller is powered from 3.3V regulator. Add vmmc-supply and vqmmc-supply properties to sdmmc0 node. Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx> --- arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts index 999adeca6f33..adcb3240e5f5 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts @@ -712,6 +712,8 @@ &sdmmc0 { bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; + vmmc-supply = <&vdd_io_reg>; // 3.3V + vqmmc-supply = <&vdd_io_reg>; // 3.3V status = "okay"; }; -- 2.43.0