On Tue, Jan 23, 2024 at 2:09 AM Emmanuel Gil Peyrot <linkmauve@xxxxxxxxxxxx> wrote: > > On Mon, Jan 22, 2024 at 09:52:10PM +0100, Daniel Lezcano wrote: > > > > Hi Emmanuel, > > Hi Daniel, > > > > > please sync up with Alexey Charkov (added in Cc) who is doing a similar > > configuration [1] which was reviewed. > > Oh, I wasn’t aware of this work, it seems there is nothing this series > add over Alexey’s so I will drop it. > > Is there a document tracking your upstreaming work? I was planning on > sending a series enabling the VEPU121 hardware encoders next, but if > you’re also working on it I can drop it too (although I don’t see any > series from a quick search). I’ve now subscribed to the linux-rockchip > mailing list so I shouldn’t miss any new series. Hi Emmanuel! I'm currently in a rather more ad-hoc contribution mode, so there is no tracking document. Here are the things I have in the making: - Wire up the GPIO pin that drives WLAN enable signal in the M.2 key E slot as an rfkill device to make WiFi modules usable on Rock 5B. Applied locally, tested, submitted [1], not yet reviewed or applied upstream - Add thermal zones managed by the TSADC to RK3588 (the series Daniel referred to). Applied locally, tested, submitted [2], working on v3 to incorporate the feedback - Wire up the PWM fan as an active cooling device managed by the thermal code. Applied locally, tested, will submit as part of v3 thermal zones code - Add OPP data for CPUs on RK3588 to enable runtime CPU frequency scaling. Applied locally, testing now, not yet submitted I also wanted to wire up the display outputs for Rock 5B, given that VOP support has been recently enabled on RK3588, but haven't yet started on that one. I haven't touched the hardware encoders either, so please go ahead with sending those :-) Best regards, Alexey [1] https://lore.kernel.org/linux-rockchip/20240106202650.22310-1-alchark@xxxxxxxxx/ [2] https://lore.kernel.org/linux-rockchip/20240109192608.5981-1-alchark@xxxxxxxxx/