Re: [PATCH v7 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Jan 23, 2015 at 9:31 PM, Peter Hurley <peter@xxxxxxxxxxxxxxxxxx> wrote:
> Hi Chunyan,
>
> Just the minor fix to zeroing the stack local in sprd_set_termios()
> and using dev_get_drvdata() in sprd_suspend()/sprd_resume().
>

ok, I see.

> Regards,
> Peter Hurley
>
> On 01/23/2015 08:01 AM, Chunyan Zhang wrote:
>> Add a full sc9836-uart driver for SC9836 SoC which is based on the
>> spreadtrum sharkl64 platform.
>> This driver also support earlycon.
>
> [...]
>
>> +static void sprd_set_termios(struct uart_port *port,
>> +                                 struct ktermios *termios,
>> +                                 struct ktermios *old)
>> +{
>> +     unsigned int baud, quot;
>> +     unsigned int lcr, fc;
>
>         unsigned int lcr = 0, fc;
>
>> +     unsigned long flags;
>> +
>> +     /* ask the core to calculate the divisor for us */
>> +     baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);
>> +
>> +     quot = (unsigned int)((port->uartclk + baud / 2) / baud);
>> +
>> +     /* set data length */
>> +     switch (termios->c_cflag & CSIZE) {
>> +     case CS5:
>> +             lcr |= SPRD_LCR_DATA_LEN5;
>> +             break;
>> +     case CS6:
>> +             lcr |= SPRD_LCR_DATA_LEN6;
>> +             break;
>> +     case CS7:
>> +             lcr |= SPRD_LCR_DATA_LEN7;
>> +             break;
>> +     case CS8:
>> +     default:
>> +             lcr |= SPRD_LCR_DATA_LEN8;
>> +             break;
>> +     }
>> +
>> +     /* calculate stop bits */
>> +     lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT);
>> +     if (termios->c_cflag & CSTOPB)
>> +             lcr |= SPRD_LCR_STOP_2BIT;
>> +     else
>> +             lcr |= SPRD_LCR_STOP_1BIT;
>> +
>> +     /* calculate parity */
>> +     lcr &= ~SPRD_LCR_PARITY;
>> +     termios->c_cflag &= ~CMSPAR;    /* no support mark/space */
>> +     if (termios->c_cflag & PARENB) {
>> +             lcr |= SPRD_LCR_PARITY_EN;
>> +             if (termios->c_cflag & PARODD)
>> +                     lcr |= SPRD_LCR_ODD_PAR;
>> +             else
>> +                     lcr |= SPRD_LCR_EVEN_PAR;
>> +     }
>
> [...]
>
>> +static int sprd_probe(struct platform_device *pdev)
>> +{
>> +     struct resource *res;
>> +     struct uart_port *up;
>> +     struct clk *clk;
>> +     int irq;
>> +     int index;
>> +     int ret;
>> +
>> +     for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
>> +             if (sprd_port[index] == NULL)
>> +                     break;
>> +
>> +     if (index == ARRAY_SIZE(sprd_port))
>> +             return -EBUSY;
>> +
>> +     index = sprd_probe_dt_alias(index, &pdev->dev);
>> +
>> +     sprd_port[index] = devm_kzalloc(&pdev->dev,
>> +             sizeof(*sprd_port[index]), GFP_KERNEL);
>> +     if (!sprd_port[index])
>> +             return -ENOMEM;
>> +
>> +     pdev->id = index;
>
> see my recent reply regarding this and sprd_suspend/sprd_resume.
>
>> +
>> +     up = &sprd_port[index]->port;
>> +     up->dev = &pdev->dev;
>> +     up->line = index;
>> +     up->type = PORT_SPRD;
>> +     up->iotype = SERIAL_IO_PORT;
>> +     up->uartclk = SPRD_DEF_RATE;
>> +     up->fifosize = SPRD_FIFO_SIZE;
>> +     up->ops = &serial_sprd_ops;
>> +     up->flags = UPF_BOOT_AUTOCONF;
>> +
>> +     clk = devm_clk_get(&pdev->dev, NULL);
>> +     if (!IS_ERR(clk))
>> +             up->uartclk = clk_get_rate(clk);
>> +
>> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +     if (!res) {
>> +             dev_err(&pdev->dev, "not provide mem resource\n");
>> +             return -ENODEV;
>> +     }
>> +     up->mapbase = res->start;
>> +     up->membase = devm_ioremap_resource(&pdev->dev, res);
>> +     if (IS_ERR(up->membase))
>> +             return PTR_ERR(up->membase);
>> +
>> +     irq = platform_get_irq(pdev, 0);
>> +     if (irq < 0) {
>> +             dev_err(&pdev->dev, "not provide irq resource\n");
>> +             return -ENODEV;
>> +     }
>> +     up->irq = irq;
>> +
>> +     if (!sprd_ports_num) {
>> +             ret = uart_register_driver(&sprd_uart_driver);
>> +             if (ret < 0) {
>> +                     pr_err("Failed to register SPRD-UART driver\n");
>> +                     return ret;
>> +             }
>> +     }
>> +     sprd_ports_num++;
>> +
>> +     ret = uart_add_one_port(&sprd_uart_driver, up);
>> +     if (ret) {
>> +             sprd_port[index] = NULL;
>> +             sprd_remove(pdev);
>> +     }
>> +
>> +     platform_set_drvdata(pdev, up);
>> +
>> +     return ret;
>> +}
>> +
>> +static int sprd_suspend(struct device *dev)
>> +{
>> +     int id = to_platform_device(dev)->id;
>> +     struct uart_port *port = &sprd_port[id]->port;
>> +
>> +     uart_suspend_port(&sprd_uart_driver, port);
>
> same comment: see my recent reply using dev_get_drvdata().
>

ok, i see. thanks!

Chunyan

>> +
>> +     return 0;
>> +}
>> +
>> +static int sprd_resume(struct device *dev)
>> +{
>> +     int id = to_platform_device(dev)->id;
>> +     struct uart_port *port = &sprd_port[id]->port;
>> +
>> +     uart_resume_port(&sprd_uart_driver, port);
>> +
>> +     return 0;
>> +}
>> +
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux