Re: [PATCH 00/14] arm64: zynqmp: Some DT alignment

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 1/8/24 16:39, Michal Simek wrote:
Hi,

I am sending couple of patches to update DTs for current ZynqMP boards.
All should be aligned with the latest DT binding and should also solve all
build issues reported by W=1.

Thanks,
Michal


Ilias Apalodimas (1):
   arm64: zynqmp: Add an OP-TEE node to the device tree

Michal Simek (9):
   arm64: xilinx: Move address/size-cells to proper locations
   arm64: zynqmp: Setup default si570 frequency to 156.25MHz
   arm64: zynqmp: Describe assigned-clocks for uarts
   arm64: zynqmp: Fix comment to be aligned with board name.
   arm64: zynqmp: Introduce u-boot options node with bootscr-address
   arm64: zynqmp: Remove incorrect comment from kv260s
   arm64: zynqmp: Rename i2c?-gpio to i2c?-gpio-grp
   arm64: zynqmp: Comment all smmu entries
   arm64: zynqmp: Align usb clock nodes with binding

Neal Frager (1):
   arm64: zynqmp: Add output-enable pins to SOMs

Srinivas Neeli (1):
   arm64: zynqmp: Add resets property for CAN nodes

Tejas Bhumkar (1):
   arm64: zynqmp: Disable Tri-state for MIO38 Pin

Thippeswamy Havalige (1):
   arm64: zynqmp: Update ECAM size to discover up to 256 buses

  .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 16 ++-
  .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 36 ++++++-
  .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 37 ++++++-
  .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts    |  6 ++
  .../boot/dts/xilinx/zynqmp-zc1232-revA.dts    |  2 +
  .../boot/dts/xilinx/zynqmp-zc1254-revA.dts    |  2 +
  .../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts    |  6 +-
  .../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts    | 10 +-
  .../dts/xilinx/zynqmp-zc1751-xm017-dc3.dts    |  2 +
  .../dts/xilinx/zynqmp-zc1751-xm018-dc4.dts    |  2 +
  .../dts/xilinx/zynqmp-zc1751-xm019-dc5.dts    |  4 +-
  .../boot/dts/xilinx/zynqmp-zcu100-revC.dts    |  4 +-
  .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    | 12 ++-
  .../boot/dts/xilinx/zynqmp-zcu104-revA.dts    |  6 +-
  .../boot/dts/xilinx/zynqmp-zcu104-revC.dts    |  6 +-
  .../boot/dts/xilinx/zynqmp-zcu106-revA.dts    | 12 ++-
  .../boot/dts/xilinx/zynqmp-zcu111-revA.dts    | 10 +-
  .../boot/dts/xilinx/zynqmp-zcu1275-revA.dts   |  4 +-
  arch/arm64/boot/dts/xilinx/zynqmp.dtsi        | 97 ++++++++++---------
  19 files changed, 204 insertions(+), 70 deletions(-)


Applied 2-14 patches. Patch 1 should be revisit based on discussion with Krzysztof here
https://lore.kernel.org/all/f2c1cae3b845d4609f8181f2dcb09a55f705667c.1704893723.git.michal.simek@xxxxxxx/


Thanks,
Michal





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux