On 21/01/2024 11:35, Kim Seer Paller wrote: > The ADG1414 is a 9.5 Ω RON ±15 V/+12 V/±5 V iCMOS Serially-Controlled > Octal SPST Switches > > Signed-off-by: Kim Seer Paller <kimseer.paller@xxxxxxxxxx> > --- > .../bindings/gpio/gpio-adg1414.yaml | 66 +++++++++++++++++++ > MAINTAINERS | 6 ++ > 2 files changed, 72 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/gpio-adg1414.yaml > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-adg1414.yaml b/Documentation/devicetree/bindings/gpio/gpio-adg1414.yaml > new file mode 100644 > index 000000000..24a51e79f > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/gpio-adg1414.yaml Filename like compatible. > @@ -0,0 +1,66 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/gpio/gpio-adg1414.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ADG1414 SPST Switch Driver "Driver" as Linux driver or some hardware driver? > + > +maintainers: > + - Kim Seer Paller <kimseer.paller@xxxxxxxxxx> > + > +description: > + The ADG1414 is a 9.5 Ω RON ±15 V/+12 V/±5 V iCMOS serially-controlled > + octal SPST switches. > + > +properties: > + compatible: > + enum: > + - adi,adg1414 > + > + reg: > + maxItems: 1 > + > + gpio-controller: true > + > + '#gpio-cells': > + const: 2 > + > + spi-cpha: true > + > + reset-gpios: > + description: GPIO specifier that resets the device. Drop description, it's obvious. You could instead say something useful, like name of pin. > + maxItems: 1 > + > + '#daisy-chained-devices': > + description: The number of daisy-chained devices. > + default: 1 > + minimum: 1 > + maximum: 4 This needs to be added to dtschema or at least its type should be here. > + > +required: > + - compatible > + - reg > + - spi-cpha > + > +allOf: > + - $ref: /schemas/spi/spi-peripheral-props.yaml# > + > +unevaluatedProperties: false > + Best regards, Krzysztof
