Re: [PATCH v2 01/10] dt-bindings: mtd: brcmnand: Updates for bcmbca SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, 18 Jan 2024 at 20:56, <dregan@xxxxxxxxxxxx> wrote:
>
> From: William Zhang <william.zhang@xxxxxxxxxxxx>
>
> Update the descriptions to reflect different families of broadband SoC and
> use the general name bcmbca for ARM based SoC.
>
> Add brcm,nand-use-wp property to have an option for disabling this
> feature on broadband board design that does not use write protection.
>
> Add brcm,nand-ecc-use-strap to get ecc setting from board boot strap for
> broadband board designs because they do not specify ecc setting in dts
> but rather using the strap setting.
>
> Remove the requirement of interrupts property to reflect the driver
> code. Also add myself to the list of maintainers.
>
> Signed-off-by: William Zhang <william.zhang@xxxxxxxxxxxx>
> Reviewed-by: David Regan <dregan@xxxxxxxxxxxx>
> ---
> Changes in v2:
> - Revert the new compatible string nand-bcmbca
> - Drop the BCM63168 compatible fix to avoid any potential ABI
> incompatibility issue
> - Simplify the explanation for brcm,nand-use-wp
> - Keep the interrupt name requirement when interrupt number is specified
> ---
>  .../bindings/mtd/brcm,brcmnand.yaml           | 36 +++++++++++++++----
>  1 file changed, 30 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
> index f57e96374e67..56176ec1a992 100644
> --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
> +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
> @@ -9,6 +9,7 @@ title: Broadcom STB NAND Controller
>  maintainers:
>    - Brian Norris <computersforpeace@xxxxxxxxx>
>    - Kamal Dasu <kdasu.kdev@xxxxxxxxx>
> +  - William Zhang <william.zhang@xxxxxxxxxxxx>
>
>  description: |
>    The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND
> @@ -18,9 +19,10 @@ description: |
>    supports basic PROGRAM and READ functions, among other features.
>
>    This controller was originally designed for STB SoCs (BCM7xxx) but is now
> -  available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and
> -  iProc/Cygnus. Its history includes several similar (but not fully register
> -  compatible) versions.
> +  available on a variety of Broadcom SoCs, including some BCM3xxx, MIPS based
> +  Broadband SoC (BCM63xx), ARM based Broadband SoC (BCMBCA) and iProc/Cygnus.
> +  Its history includes several similar (but not fully register compatible)
> +  versions.
>
>    -- Additional SoC-specific NAND controller properties --
>
> @@ -53,7 +55,7 @@ properties:
>                - brcm,brcmnand-v7.2
>                - brcm,brcmnand-v7.3
>            - const: brcm,brcmnand
> -      - description: BCM63138 SoC-specific NAND controller
> +      - description: BCMBCA SoC-specific NAND controller
>          items:
>            - const: brcm,nand-bcm63138
>            - enum:
> @@ -65,7 +67,7 @@ properties:
>            - const: brcm,nand-iproc
>            - const: brcm,brcmnand-v6.1
>            - const: brcm,brcmnand
> -      - description: BCM63168 SoC-specific NAND controller
> +      - description: BCM63xx SoC-specific NAND controller

Only the BCM63268 family has a v4.0 NAND controller with support for
ONFI and raw access; BCM6368 has a v2.1, and BCM6328 and BCM6362 have
a v2.2.

So claiming this is a generic binding is wrong; you would need to add
the appropriate variants first. Or add another one for the BCM6368
NAND v2.x controllers, which is missing. You can find them used in
arch/mips/boot/dts/brcm/bcm63{28,62,68}.dtsi.

>          items:
>            - const: brcm,nand-bcm63168
>            - const: brcm,nand-bcm6368

Also bcm63168's v4.0 has a different register layout than bcm6368's
v2.x, so claiming brcm.nand-bcm6368 as compatible here is a bit weird.
It works because the register layout used is derived from the
"brcm,brcmnand-vX.Y" compatible, and the driver attaching to
'brcm,nand-bcm6368" only uses the shared interrupt registers which are
identical, the layout only diverges after that.

But then again these aren't really used as compatibles in the original
sense, and more like tags which describe different parts of the
controller, and the combination is the whole unique "compatible". Not
sure if this is how compatibles are supposed to be used. /rant.

Best Regards,
Jonas




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux