From: Xiaowei Bao <xiaowei.bao@xxxxxxx>
Due to the INTA is shared with the active-low PHY2 interrupt on
P1010RDB-PA board, so configure P1010RDB-PA's INTA with polarity as
active-low, the P1010RDB-PB board is used separately, so configure
P1010RDB-PB's INTA with polarity as active-high. The INTX in
P1010RDB-PB do not work because of the pcie@0 node fixup will be
overwrited by p1010si-post.dtsi file, so we move the pcie@0 node fixup
to p1010rdb-pb.dts and p1010rdb-pb_36b.dts.
Signed-off-by: Xiaowei Bao <xiaowei.bao@xxxxxxx>
Signed-off-by: Li Yang <leoyang.li@xxxxxxx>
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts | 16 ++++++++++++++++
arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts | 16 ++++++++++++++++
arch/powerpc/boot/dts/fsl/p1010rdb.dtsi | 16 ----------------
3 files changed, 32 insertions(+), 16 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
index 3a94acbb3c033..ce3346d77858f 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
@@ -29,3 +29,19 @@ &phy2 {
};
/include/ "p1010si-post.dtsi"
+
+&pci0 {
+ pcie@0 {
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ /*
+ *irq[4:5] are active-high
+ *irq[6:7] are active-low
+ */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
index 4cf255fedc96e..83590354f9a09 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
@@ -56,3 +56,19 @@ &phy2 {
};
/include/ "p1010si-post.dtsi"
+
+&pci0 {
+ pcie@0 {
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ /*
+ *irq[4:5] are active-high
+ *irq[6:7] are active-low
+ */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
index 2ca9cee2ddeb2..ef49a7d6c69dd 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
@@ -215,19 +215,3 @@ enet2: ethernet@b2000 {
phy-connection-type = "sgmii";
};
};
-
-&pci0 {
- pcie@0 {
- interrupt-map = <
- /* IDSEL 0x0 */
- /*
- *irq[4:5] are active-high
- *irq[6:7] are active-low
- */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
- 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
- >;
- };
-};
--
2.34.1
