Since some i.MX platforms make use of the separate PHY driver, use IMX6_PCIE_FLAG_HAS_PHYDRV flag to identify them and get the reference to PHY from DT. This simplifies the code. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- Notes: Change from v8 to v9: - change commit message according Manivannan's suggestion - Add Manivannan's review tag Change from v7 to v8: - renmae IMX6_PCIE_FLAG_HAS_PHY to IMX6_PCIE_FLAG_HAS_PHYDRV Change from v6 to v7: - none Change from v4 to v5: - none, Keep IMX6_PCIE_FLAG_HAS_PHY to indicate dts mismatch when platform require phy suppport. Change from v1 to v3: - none drivers/pci/controller/dwc/pci-imx6.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 0997dd7d901a4..a33ec006660c8 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -60,6 +60,9 @@ enum imx6_pcie_variants { #define IMX6_PCIE_FLAG_IMX6_PHY BIT(0) #define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE BIT(1) #define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND BIT(2) +#define IMX6_PCIE_FLAG_HAS_PHYDRV BIT(3) + +#define imx6_check_flag(pci, val) (pci->drvdata->flags & val) #define IMX6_PCIE_MAX_CLKS 6 @@ -1277,6 +1280,13 @@ static int imx6_pcie_probe(struct platform_device *pdev) if (ret) return ret; + if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_PHYDRV)) { + imx6_pcie->phy = devm_phy_get(dev, "pcie-phy"); + if (IS_ERR(imx6_pcie->phy)) + return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy), + "failed to get pcie phy\n"); + } + switch (imx6_pcie->drvdata->variant) { case IMX7D: if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR) @@ -1306,11 +1316,6 @@ static int imx6_pcie_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset), "failed to get pcie apps reset control\n"); - imx6_pcie->phy = devm_phy_get(dev, "pcie-phy"); - if (IS_ERR(imx6_pcie->phy)) - return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy), - "failed to get pcie phy\n"); - break; default: break; @@ -1454,14 +1459,17 @@ static const struct imx6_pcie_drvdata drvdata[] = { }, [IMX8MM] = { .variant = IMX8MM, - .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND, + .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND | + IMX6_PCIE_FLAG_HAS_PHYDRV | + IMX6_PCIE_FLAG_HAS_APP_RESET, .gpr = "fsl,imx8mm-iomuxc-gpr", .clk_names = imx8mm_clks, .clks_cnt = ARRAY_SIZE(imx8mm_clks), }, [IMX8MP] = { .variant = IMX8MP, - .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND, + .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND | + IMX6_PCIE_FLAG_HAS_PHYDRV, .gpr = "fsl,imx8mp-iomuxc-gpr", .clk_names = imx8mm_clks, .clks_cnt = ARRAY_SIZE(imx8mm_clks), @@ -1475,6 +1483,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { }, [IMX8MM_EP] = { .variant = IMX8MM_EP, + .flags = IMX6_PCIE_FLAG_HAS_PHYDRV, .mode = DW_PCIE_EP_TYPE, .gpr = "fsl,imx8mm-iomuxc-gpr", .clk_names = imx8mm_clks, @@ -1482,6 +1491,7 @@ static const struct imx6_pcie_drvdata drvdata[] = { }, [IMX8MP_EP] = { .variant = IMX8MP_EP, + .flags = IMX6_PCIE_FLAG_HAS_PHYDRV, .mode = DW_PCIE_EP_TYPE, .gpr = "fsl,imx8mp-iomuxc-gpr", .clk_names = imx8mm_clks, -- 2.34.1