The SC8280XP contains two additional tsens instances, providing among other things thermal measurements for the GPU. Add these and a GPU thermal-zone. Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 37 ++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index febf28356ff8..68b5ac0339a0 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -4033,6 +4033,28 @@ tsens1: thermal-sensor@c265000 { #thermal-sensor-cells = <1>; }; + tsens2: thermal-sensor@c251000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c251000 0 0x1ff>, /* TM */ + <0 0x0c224000 0 0x8>; /* SROT */ + #qcom,sensors = <11>; + interrupts-extended = <&pdc 122 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 124 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens3: thermal-sensor@c252000 { + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; + reg = <0 0x0c252000 0 0x1ff>, /* TM */ + <0 0x0c225000 0 0x8>; /* SROT */ + #qcom,sensors = <5>; + interrupts-extended = <&pdc 123 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 125 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + aoss_qmp: power-management@c300000 { compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; @@ -5212,6 +5234,21 @@ cpu-crit { }; }; + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens2 2>; + + trips { + cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + mem-thermal { polling-delay-passive = <250>; polling-delay = <1000>; --- base-commit: 943b9f0ab2cfbaea148dd6ac279957eb08b96904 change-id: 20240118-sc8280xp-tsens2_3-a5fd9a48d655 Best regards, -- Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>