Hi all, Apologies for taking a long time to follow up on this series. I took some time to test and try out the suggested changes. As for the major change in the bindings and driver, the array of switch and attenuation GPIOs were moved under child nodes utilizing the devm_fwnode_gpiod_get_index() for GPIO parsing. I have just an inquiry regarding the difficulty of implementing the use of guard(mutex)(&st->lock) for my current controller. Is it okay to simply use the mutex_lock function instead? Best regards, Kim Seer Paller Kim Seer Paller (2): dt-bindings: iio: frequency: add admfm2000 iio: frequency: admfm2000: New driver .../bindings/iio/frequency/adi,admfm2000.yaml | 129 ++++++++ MAINTAINERS | 8 + drivers/iio/frequency/Kconfig | 10 + drivers/iio/frequency/Makefile | 1 + drivers/iio/frequency/admfm2000.c | 307 ++++++++++++++++++ 5 files changed, 455 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml create mode 100644 drivers/iio/frequency/admfm2000.c base-commit: 296455ade1fdcf5f8f8c033201633b60946c589a -- 2.34.1
