Re: [PATCH 1/6] arm64: Unconditionally call unflatten_device_tree()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Rob Herring (2024-01-17 09:54:48)
> On Tue, Jan 16, 2024 at 05:27:18PM -0800, Stephen Boyd wrote:
> > Quoting Mark Rutland (2024-01-16 03:51:14)
> > > Hi Stephen,
> > > 
> > > On Fri, Jan 12, 2024 at 12:07:44PM -0800, Stephen Boyd wrote:
> > > > Call this function unconditionally so that we can populate an empty DTB
> > > > on platforms that don't boot with a firmware provided or builtin DTB.
> > > > There's no harm in calling unflatten_device_tree() unconditionally.
> > > 
> > > For better or worse, that's not true: there are systems the provide both a DTB
> > > *and* ACPI tables, and we must not consume both at the same time as those can
> > > clash and cause all sorts of problems. In addition, we don't want people being
> > > "clever" and describing disparate portions of their system in ACPI and DT.
> > > 
> > > It is a very deliberate choice to not unflatten the DTB when ACPI is in use,
> > > and I don't think we want to reopen this can of worms.
> > 
> > Hmm ok. I missed this part. Can we knock out the initial_boot_params in
> > this case so that we don't unflatten a DTB when ACPI is in use?
> 
> You mean so we don't unflatten the boot DTB, but instead unflatten the 
> empty one, right? That sounds fine.

Yes. Note, I don't have any ACPI arm64 system on hand to test anything
with :-(

> 
> Another thing to check is kexec because it will still need the original 
> DTB I think. Though if you are doing ACPI boot and kexec'ing, kexec may 
> write out everything needed by the next kernel and the empty DTB would 
> work just fine.

Yeah, it looks like dt_is_stub() will keep doing its thing there. The
empty DTB will have nothing in it and so kexec with ACPI and the empty
DTB will continue to use ACPI, and then the empty DTB will be added in
again.

> Of course those users booting with ACPI and then 
> kexec'ing to DT boot will be broken. Perhaps that's a feature...

I don't know how this part works. If you kexec to DT boot won't you run
through startup again and initial_boot_params will have a non-empty DTB
in it? I'd think this would keep working.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux