Nylon Chen wrote: > This removes the active-low properties of the PWM-controlled LEDs in > the HiFive Unmatched device tree. > > The reference is hifive-unleashed-a00.pdf[0] and hifive-unmatched-schematics-v3.pdf[1]. > > Link: https://sifive.cdn.prismic.io/sifive/c52a8e32-05ce-4aaf-95c8-7bf8453f8698_hifive-unleashed-a00-schematics-1.pdf [0] > Link: https://sifive.cdn.prismic.io/sifive/6a06d6c0-6e66-49b5-8e9e-e68ce76f4192_hifive-unmatched-schematics-v3.pdf [1] > > Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> > Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> > Co-developed-by: Zong Li <zong.li@xxxxxxxxx> > Signed-off-by: Zong Li <zong.li@xxxxxxxxx> > Co-developed-by: Vincent Chen <vincent.chen@xxxxxxxxxx> > Signed-off-by: Vincent Chen <vincent.chen@xxxxxxxxxx> > Signed-off-by: Nylon Chen <nylon.chen@xxxxxxxxxx> > --- > arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 8 ++++---- > arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 12 ++++-------- > 2 files changed, 8 insertions(+), 12 deletions(-) > > diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts > index 900a50526d77..11e7ac1c54bb 100644 > --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts > +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts > @@ -49,7 +49,7 @@ led-controller { > compatible = "pwm-leds"; > > led-d1 { > - pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>; > + pwms = <&pwm0 0 7812500 0>; > active-low; > color = <LED_COLOR_ID_GREEN>; > max-brightness = <255>; > @@ -57,7 +57,7 @@ led-d1 { > }; > > led-d2 { > - pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>; > + pwms = <&pwm0 1 7812500 0>; > active-low; > color = <LED_COLOR_ID_GREEN>; > max-brightness = <255>; > @@ -65,7 +65,7 @@ led-d2 { > }; > > led-d3 { > - pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>; > + pwms = <&pwm0 2 7812500 0>; > active-low; > color = <LED_COLOR_ID_GREEN>; > max-brightness = <255>; > @@ -73,7 +73,7 @@ led-d3 { > }; > > led-d4 { > - pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>; > + pwms = <&pwm0 3 7812500 0>; > active-low; > color = <LED_COLOR_ID_GREEN>; > max-brightness = <255>; > diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts > index 07387f9c135c..b328ee80693f 100644 > --- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts > +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts > @@ -51,8 +51,7 @@ led-controller-1 { > compatible = "pwm-leds"; > > led-d12 { > - pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>; > - active-low; > + pwms = <&pwm0 0 7812500 0>; Here you remove the active-low property, but you don't above. I'm not sure what's the right thing to do, but I would have expected the same change in both places. /Emil > color = <LED_COLOR_ID_GREEN>; > max-brightness = <255>; > label = "d12"; > @@ -68,20 +67,17 @@ multi-led { > label = "d2"; > > led-red { > - pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>; > - active-low; > + pwms = <&pwm0 2 7812500 0>; > color = <LED_COLOR_ID_RED>; > }; > > led-green { > - pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>; > - active-low; > + pwms = <&pwm0 1 7812500 0>; > color = <LED_COLOR_ID_GREEN>; > }; > > led-blue { > - pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>; > - active-low; > + pwms = <&pwm0 3 7812500 0>; > color = <LED_COLOR_ID_BLUE>; > }; > }; > -- > 2.42.0 > > > _______________________________________________ > linux-riscv mailing list > linux-riscv@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-riscv
