On Tue, 16 Jan 2024 at 11:49, Ritesh Kumar <quic_riteshk@xxxxxxxxxxx> wrote: > > Enable Display Subsystem with Novatek NT36672E Panel > on qcm6490 idp platform. Is this panel always present on the IDP board or is it an optional addon, like the panels for all the RBn boards? > > Signed-off-by: Ritesh Kumar <quic_riteshk@xxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 100 +++++++++++++++++++++++ > 1 file changed, 100 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > index 2a6e4907c5ee..efa5252130a1 100644 > --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > @@ -9,6 +9,7 @@ > #define PM7250B_SID 8 > #define PM7250B_SID1 9 > > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > #include <dt-bindings/regulator/qcom,rpmh-regulator.h> > #include "sc7280.dtsi" > #include "pm7250b.dtsi" > @@ -38,6 +39,25 @@ > stdout-path = "serial0:115200n8"; > }; > > + lcd_disp_bias: lcd-disp-bias-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "lcd_disp_bias"; > + regulator-min-microvolt = <5500000>; > + regulator-max-microvolt = <5500000>; > + gpio = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + pinctrl-names = "default"; > + pinctrl-0 = <&lcd_disp_bias_en>; > + }; > + > + pm8350c_pwm_backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&pm8350c_pwm 3 65535>; > + enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_lcd_bl_en>; > + }; > + > reserved-memory { > xbl_mem: xbl@80700000 { > reg = <0x0 0x80700000 0x0 0x100000>; > @@ -420,6 +440,86 @@ > }; > }; > > +&gpu { > + status = "disabled"; > +}; > + > +&mdss { > + status = "okay"; > +}; > + > +&mdss_dsi { > + vdda-supply = <&vreg_l6b_1p2>; > + status = "okay"; > + > + panel@0 { > + compatible = "novatek,nt36672e"; > + reg = <0>; > + > + reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>; > + > + vddi-supply = <&vreg_l8c_1p62>; > + avdd-supply = <&lcd_disp_bias>; > + avee-supply = <&lcd_disp_bias>; > + > + backlight = <&pm8350c_pwm_backlight>; > + > + port { > + panel0_in: endpoint { > + remote-endpoint = <&mdss_dsi0_out>; > + }; > + }; > + }; > +}; > + > +&mdss_dsi0_out { > + remote-endpoint = <&panel0_in>; > + data-lanes = <0 1 2 3>; > +}; > + > +&mdss_dsi_phy { > + vdds-supply = <&vreg_l10c_0p88>; > + status = "okay"; > +}; > + > +&pm7250b_gpios { > + lcd_disp_bias_en: lcd-disp-bias-en-state { > + pins = "gpio2"; > + function = "func1"; > + bias-disable; > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; > + input-disable; > + output-enable; > + power-source = <0>; > + }; > +}; > + > +&pm8350c_gpios { > + pmic_lcd_bl_en: pmic-lcd-bl-en-state { > + pins = "gpio7"; > + function = "normal"; > + bias-disable; > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; > + output-low; > + power-source = <0>; > + }; > + > + pmic_lcd_bl_pwm: pmic-lcd-bl-pwm-state { > + pins = "gpio8"; > + function = "func1"; > + bias-disable; > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; > + output-low; > + power-source = <0>; > + }; > +}; > + > +&pm8350c_pwm { > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_lcd_bl_pwm>; > + status = "okay"; > +}; > + > &qupv3_id_0 { > status = "okay"; > }; > -- > 2.17.1 > -- With best wishes Dmitry