[PATCH v6 04/12] clk: qcom: gpucc-sm6375: Unregister critical clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some clocks need to be always-on, but we don't really do anything
with them, other than calling enable() once and telling Linux they're
enabled.

Unregister them to save a couple of bytes and, perhaps more
importantly, allow for runtime suspend of the clock controller device,
as CLK_IS_CRITICAL prevents the latter.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 drivers/clk/qcom/gpucc-sm6375.c | 34 ++++------------------------------
 1 file changed, 4 insertions(+), 30 deletions(-)

diff --git a/drivers/clk/qcom/gpucc-sm6375.c b/drivers/clk/qcom/gpucc-sm6375.c
index da24276a018e..07ebe5e139d5 100644
--- a/drivers/clk/qcom/gpucc-sm6375.c
+++ b/drivers/clk/qcom/gpucc-sm6375.c
@@ -183,20 +183,6 @@ static struct clk_rcg2 gpucc_gx_gfx3d_clk_src = {
 	},
 };
 
-static struct clk_branch gpucc_ahb_clk = {
-	.halt_reg = 0x1078,
-	.halt_check = BRANCH_HALT_DELAY,
-	.clkr = {
-		.enable_reg = 0x1078,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "gpucc_ahb_clk",
-			.flags = CLK_IS_CRITICAL,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
 static struct clk_branch gpucc_cx_gfx3d_clk = {
 	.halt_reg = 0x10a4,
 	.halt_check = BRANCH_HALT_DELAY,
@@ -294,20 +280,6 @@ static struct clk_branch gpucc_cxo_clk = {
 	},
 };
 
-static struct clk_branch gpucc_gx_cxo_clk = {
-	.halt_reg = 0x1060,
-	.halt_check = BRANCH_HALT_DELAY,
-	.clkr = {
-		.enable_reg = 0x1060,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "gpucc_gx_cxo_clk",
-			.flags = CLK_IS_CRITICAL,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
 static struct clk_branch gpucc_gx_gfx3d_clk = {
 	.halt_reg = 0x1054,
 	.halt_check = BRANCH_HALT_DELAY,
@@ -381,7 +353,6 @@ static struct gdsc gpu_gx_gdsc = {
 };
 
 static struct clk_regmap *gpucc_sm6375_clocks[] = {
-	[GPU_CC_AHB_CLK] = &gpucc_ahb_clk.clkr,
 	[GPU_CC_CX_GFX3D_CLK] = &gpucc_cx_gfx3d_clk.clkr,
 	[GPU_CC_CX_GFX3D_SLV_CLK] = &gpucc_cx_gfx3d_slv_clk.clkr,
 	[GPU_CC_CX_GMU_CLK] = &gpucc_cx_gmu_clk.clkr,
@@ -389,7 +360,6 @@ static struct clk_regmap *gpucc_sm6375_clocks[] = {
 	[GPU_CC_CXO_AON_CLK] = &gpucc_cxo_aon_clk.clkr,
 	[GPU_CC_CXO_CLK] = &gpucc_cxo_clk.clkr,
 	[GPU_CC_GMU_CLK_SRC] = &gpucc_gmu_clk_src.clkr,
-	[GPU_CC_GX_CXO_CLK] = &gpucc_gx_cxo_clk.clkr,
 	[GPU_CC_GX_GFX3D_CLK] = &gpucc_gx_gfx3d_clk.clkr,
 	[GPU_CC_GX_GFX3D_CLK_SRC] = &gpucc_gx_gfx3d_clk_src.clkr,
 	[GPU_CC_GX_GMU_CLK] = &gpucc_gx_gmu_clk.clkr,
@@ -455,6 +425,10 @@ static int gpucc_sm6375_probe(struct platform_device *pdev)
 	clk_lucid_pll_configure(&gpucc_pll0, regmap, &gpucc_pll0_config);
 	clk_lucid_pll_configure(&gpucc_pll1, regmap, &gpucc_pll1_config);
 
+	/* Keep some clocks always-on */
+	qcom_branch_set_clk_en(regmap, 0x1078); /* GPUCC_AHB_CLK */
+	qcom_branch_set_clk_en(regmap, 0x1060); /* GPUCC_GX_CXO_CLK */
+
 	ret = qcom_cc_really_probe(pdev, &gpucc_sm6375_desc, regmap);
 	pm_runtime_put(&pdev->dev);
 

-- 
2.43.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux