v4:
done changes as per Arnd review comments.
v3:
Added changes to support numa on arm64 based platforms.
Tested these patches on cavium's multinode(2 node topology) platform.
In this patchset, defined and implemented dt bindings for numa mapping
for core and memory using device node property arm,associativity.
v2:
Defined and implemented numa map for memory, cores to node and
proximity distance matrix of nodes to each other.
v1:
Initial patchset to support numa on arm64 platforms.
Hi Arnd,
there are not many common functions to pull to of driver from
powerpc and arm.
thanks
Ganapat
Ganapatrao Kulkarni (4):
arm64: defconfig: increase NR_CPUS range to 2-4096.
Documentation: arm64/arm: dt bindings for numa.
arm64:thunder: Add initial dts for Cavium's Thunder SoC in 2 Node
topology.
arm64:numa: adding numa support for arm64 platforms.
Documentation/devicetree/bindings/arm/numa.txt | 212 +++++++
arch/arm64/Kconfig | 36 +-
arch/arm64/boot/dts/thunder-88xx-2n.dts | 78 +++
arch/arm64/boot/dts/thunder-88xx-2n.dtsi | 790 +++++++++++++++++++++++++
arch/arm64/include/asm/mmzone.h | 32 +
arch/arm64/include/asm/numa.h | 43 ++
arch/arm64/kernel/Makefile | 1 +
arch/arm64/kernel/dt_numa.c | 302 ++++++++++
arch/arm64/kernel/setup.c | 8 +
arch/arm64/kernel/smp.c | 2 +
arch/arm64/mm/Makefile | 1 +
arch/arm64/mm/init.c | 34 +-
arch/arm64/mm/numa.c | 522 ++++++++++++++++
13 files changed, 2053 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/numa.txt
create mode 100644 arch/arm64/boot/dts/thunder-88xx-2n.dts
create mode 100644 arch/arm64/boot/dts/thunder-88xx-2n.dtsi
create mode 100644 arch/arm64/include/asm/mmzone.h
create mode 100644 arch/arm64/include/asm/numa.h
create mode 100644 arch/arm64/kernel/dt_numa.c
create mode 100644 arch/arm64/mm/numa.c
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
