Re: [PATCH v5 7/8] iio: adc: ad9467: convert to backend framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 12 Jan 2024 17:40:21 +0100
Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx> wrote:

> From: Nuno Sa <nuno.sa@xxxxxxxxxx>
> 
> Convert the driver to use the new IIO backend framework. The device
> functionality is expected to be the same (meaning no added or removed
> features).
> 
> Also note this patch effectively breaks ABI and that's needed so we can
> properly support this device and add needed features making use of the
> new IIO framework.
> 
> Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx>

Hi Nuno,

Some trivial stuff in here (not I reviewed in reverse so might make more
sense read that way).  Mostly little changes that will reduce what
appears to be going on in this patch to the minimum possible


>  
> -static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2)
> +static int ad9467_get_scale(struct ad9467_state *st, int *val, int *val2)
>  {
> -	const struct adi_axi_adc_chip_info *info = conv->chip_info;

Keep an info variable around in here as well.

> -	const struct ad9467_chip_info *info1 = to_ad9467_chip_info(info);
> -	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
>  	unsigned int i, vref_val;
>  	int ret;
>  
> @@ -282,25 +276,23 @@ static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2)
>  	if (ret < 0)
>  		return ret;
>  
> -	vref_val = ret & info1->vref_mask;
> +	vref_val = ret & st->info->vref_mask;
>  
> -	for (i = 0; i < info->num_scales; i++) {
> -		if (vref_val == info->scale_table[i][1])
> +	for (i = 0; i < st->info->num_scales; i++) {
> +		if (vref_val == st->info->scale_table[i][1])
>  			break;
>  	}
>  
> -	if (i == info->num_scales)
> +	if (i == st->info->num_scales)
>  		return -ERANGE;
>  
> -	__ad9467_get_scale(conv, i, val, val2);
> +	__ad9467_get_scale(st, i, val, val2);
>  
>  	return IIO_VAL_INT_PLUS_MICRO;
>  }
>  
> -static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
> +static int ad9467_set_scale(struct ad9467_state *st, int val, int val2)
>  {
> -	const struct adi_axi_adc_chip_info *info = conv->chip_info;
> -	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);

Definitely good to keep local info variable here.

>  	unsigned int scale_val[2];
>  	unsigned int i;
>  	int ret;
> @@ -308,14 +300,14 @@ static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
>  	if (val != 0)
>  		return -EINVAL;
>  
> -	for (i = 0; i < info->num_scales; i++) {
> -		__ad9467_get_scale(conv, i, &scale_val[0], &scale_val[1]);
> +	for (i = 0; i < st->info->num_scales; i++) {
> +		__ad9467_get_scale(st, i, &scale_val[0], &scale_val[1]);
>  		if (scale_val[0] != val || scale_val[1] != val2)
>  			continue;
>  
>  		guard(mutex)(&st->lock);
>  		ret = ad9467_spi_write(st->spi, AN877_ADC_REG_VREF,
> -				       info->scale_table[i][1]);
> +				       st->info->scale_table[i][1]);
>  		if (ret < 0)
>  			return ret;
>  

>  }
>  
> -static int ad9467_write_raw(struct adi_axi_adc_conv *conv,
> +static int ad9467_write_raw(struct iio_dev *indio_dev,
>  			    struct iio_chan_spec const *chan,
>  			    int val, int val2, long mask)
>  {
> -	const struct adi_axi_adc_chip_info *info = conv->chip_info;
> -	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
> +	struct ad9467_state *st = iio_priv(indio_dev);
Even here I'd keep a local info variable as it's harmless and
reduces what is changed in this patch.

>  	long r_clk;
>  
>  	switch (mask) {
>  	case IIO_CHAN_INFO_SCALE:
> -		return ad9467_set_scale(conv, val, val2);
> +		return ad9467_set_scale(st, val, val2);
>  	case IIO_CHAN_INFO_SAMP_FREQ:
>  		r_clk = clk_round_rate(st->clk, val);
> -		if (r_clk < 0 || r_clk > info->max_rate) {
> +		if (r_clk < 0 || r_clk > st->info->max_rate) {
>  			dev_warn(&st->spi->dev,
>  				 "Error setting ADC sample rate %ld", r_clk);
>  			return -EINVAL;
> @@ -369,26 +360,53 @@ static int ad9467_write_raw(struct adi_axi_adc_conv *conv,
>  	}
>  }
>  
> -static int ad9467_read_avail(struct adi_axi_adc_conv *conv,
> +static int ad9467_read_avail(struct iio_dev *indio_dev,
>  			     struct iio_chan_spec const *chan,
>  			     const int **vals, int *type, int *length,
>  			     long mask)
>  {
> -	const struct adi_axi_adc_chip_info *info = conv->chip_info;
> -	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
> +	struct ad9467_state *st = iio_priv(indio_dev);
As below, I'd keep the local info variable to reduce scope of changes
to the minimum.

>  
>  	switch (mask) {
>  	case IIO_CHAN_INFO_SCALE:
>  		*vals = (const int *)st->scales;
>  		*type = IIO_VAL_INT_PLUS_MICRO;
>  		/* Values are stored in a 2D matrix */
> -		*length = info->num_scales * 2;
> +		*length = st->info->num_scales * 2;
>  		return IIO_AVAIL_LIST;
>  	default:
>  		return -EINVAL;
>  	}
>  }
>  

> +
>  static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode)
>  {
>  	int ret;
> @@ -401,19 +419,17 @@ static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode)
>  				AN877_ADC_TRANSFER_SYNC);
>  }
>  
> -static int ad9467_scale_fill(struct adi_axi_adc_conv *conv)
> +static int ad9467_scale_fill(struct ad9467_state *st)
>  {
> -	const struct adi_axi_adc_chip_info *info = conv->chip_info;
> -	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
>  	unsigned int i, val1, val2;
	const struct adi_axi_adc_chip_info *info = st->info;
I think...

Makes this patch more minimal which is nice and it's not a bad change
in it's own right..

Same with some other cases changed by this patch.

>  
> -	st->scales = devm_kmalloc_array(&st->spi->dev, info->num_scales,
> +	st->scales = devm_kmalloc_array(&st->spi->dev, st->info->num_scales,
>  					sizeof(*st->scales), GFP_KERNEL);
>  	if (!st->scales)
>  		return -ENOMEM;
>  
> -	for (i = 0; i < info->num_scales; i++) {
> -		__ad9467_get_scale(conv, i, &val1, &val2);
> +	for (i = 0; i < st->info->num_scales; i++) {
> +		__ad9467_get_scale(st, i, &val1, &val2);
>  		st->scales[i][0] = val1;
>  		st->scales[i][1] = val2;
>  	}
> @@ -421,11 +437,27 @@ static int ad9467_scale_fill(struct adi_axi_adc_conv *conv)
>  	return 0;
>  }
>  
> -static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv)
> +static int ad9467_setup(struct ad9467_state *st)
>  {
> -	struct ad9467_state *st = adi_axi_adc_conv_priv(conv);
> +	struct iio_backend_data_fmt data = {
> +		.sign_extend = true,
> +		.enable = true,
> +	};
> +	unsigned int c, mode;
> +	int ret;
> +
> +	mode = st->info->default_output_mode | AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;

Bit of a long line. Perhaps break it after the |

> +	ret = ad9467_outputmode_set(st->spi, mode);
> +	if (ret)
> +		return ret;
>  
> -	return ad9467_outputmode_set(st->spi, st->output_mode);
> +	for (c = 0; c < st->info->num_channels; c++) {
> +		ret = iio_backend_data_format_set(st->back, c, &data);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
>  }
>  
>  static int ad9467_reset(struct device *dev)
> @@ -443,25 +475,64 @@ static int ad9467_reset(struct device *dev)
>  	return 0;
>  }
>  
> +static int ad9467_iio_backend_get(struct ad9467_state *st)
> +{
> +	struct device *dev = &st->spi->dev;
> +	struct device_node *__back;
> +
> +	st->back = devm_iio_backend_get(&st->spi->dev, NULL);
> +	/* If not found, don't error out as we might have legacy DT property */
> +	if (IS_ERR(st->back) && PTR_ERR(st->back) != -ENOENT)
> +		return PTR_ERR(st->back);
> +	if (!IS_ERR(st->back))
> +		return 0;
Why not do this one first? I know I normally moan about having error handlers
out of line, but in this case the good is out of line whatever.

	if (!IS_ERR(st->back)
		return 0;

	if (PTR_ERR(st->back) != ENOENT)
		return PTR_ERR(st->back);

	...


> +	/*
> +	 * if we don't get the backend using the normal API's, use the legacy
> +	 * 'adi,adc-dev' property. So we get all nodes with that property, and
> +	 * look for the one pointing at us. Then we directly lookup that fwnode
> +	 * on the backend list of registered devices. This is done so we don't
> +	 * make io-backends mandatory which would break DT ABI.
> +	 */
> +	for_each_node_with_property(__back, "adi,adc-dev") {
> +		struct device_node *__me;
> +
> +		__me = of_parse_phandle(__back, "adi,adc-dev", 0);
> +		if (!__me)
> +			continue;
> +
> +		if (!device_match_of_node(dev, __me)) {
> +			of_node_put(__me);
> +			continue;
> +		}
> +
> +		of_node_put(__me);
> +		st->back = __devm_iio_backend_get_from_fwnode_lookup(dev,
> +								     of_fwnode_handle(__back));
> +		of_node_put(__back);
> +		return PTR_ERR_OR_ZERO(st->back);
> +	}
> +
> +	return -ENODEV;
> +}
> +
>  static int ad9467_probe(struct spi_device *spi)
>  {
>

>  
> -	st->output_mode = info->default_output_mode |
> -			  AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT;
> +	ret = ad9467_iio_backend_get(st);
> +	if (ret)
> +		return ret;
>  
> -	return 0;
> +	ret = devm_iio_backend_request_buffer(&spi->dev, st->back, indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = iio_backend_enable(st->back);
> +	if (ret)
> +		return ret;

I'm curious there is no iio_backend_disable() to be done in the exit path?

> +
> +	ret = ad9467_setup(st);
> +	if (ret)
> +		return ret;
> +
> +	return devm_iio_device_register(&spi->dev, indio_dev);
>  }
>  
>  static const struct of_device_id ad9467_of_match[] = {
> @@ -529,4 +610,4 @@ module_spi_driver(ad9467_driver);
>  MODULE_AUTHOR("Michael Hennerich <michael.hennerich@xxxxxxxxxx>");
>  MODULE_DESCRIPTION("Analog Devices AD9467 ADC driver");
>  MODULE_LICENSE("GPL v2");
> -MODULE_IMPORT_NS(IIO_ADI_AXI);
> +MODULE_IMPORT_NS(IIO_BACKEND);
> 





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux