Enable the SPI1 and SPI2 controllers as pins for those are exposed on the 40pins header. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> --- .../dts/mediatek/mt8395-radxa-nio-12l.dts | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts index be2094b8fe3c..191c059f5c97 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts @@ -582,6 +582,26 @@ pins-bus { }; }; + spi1_pins: spi1-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>, + <PINMUX_GPIO137__FUNC_SPIM1_CLK>, + <PINMUX_GPIO138__FUNC_SPIM1_MO>, + <PINMUX_GPIO139__FUNC_SPIM1_MI>; + bias-disable; + }; + }; + + spi2_pins: spi2-default-pins { + pins-bus { + pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>, + <PINMUX_GPIO141__FUNC_SPIM2_CLK>, + <PINMUX_GPIO142__FUNC_SPIM2_MO>, + <PINMUX_GPIO143__FUNC_SPIM2_MI>; + bias-disable; + }; + }; + uart0_pins: uart0-pins { pins-bus { pinmux = <PINMUX_GPIO98__FUNC_UTXD0>, @@ -622,6 +642,26 @@ &scp { status = "okay"; }; +&spi1 { + /* Exposed at 40 pin connector */ + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + +&spi2 { + /* Exposed at 40 pin connector */ + pinctrl-0 = <&spi2_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + &spmi { #address-cells = <2>; #size-cells = <0>; -- 2.43.0