Re: [PATCH v3 07/11] drm/mediatek: Add secure layer config support for ovl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2023-12-27 at 15:16 +0800, Jason-JH.Lin wrote:
> Hi CK,
> 
> Thanks for the review.
> 
> On Tue, 2023-12-26 at 05:14 +0000, CK Hu (胡俊光) wrote:
> > Hi, Jason:
> > 
> > On Sun, 2023-12-24 at 02:29 +0800, Jason-JH.Lin wrote:
> > > Add secure layer config support for ovl.
> > > 
> > > TODO:
> > > 1. Move DISP_REG_OVL_SECURE setting to secure world.
> > > 2. Change the parameter register address in mtk_ddp_sec_write()
> > >    from "u32 addr" to "struct cmdq_client_reg *cmdq_reg".
> > > 
> > > Signed-off-by: Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx>
> > > ---
> > >  drivers/gpu/drm/mediatek/mtk_disp_drv.h     |  2 ++
> > >  drivers/gpu/drm/mediatek/mtk_disp_ovl.c     | 31
> > > +++++++++++++++++++--
> > >  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 29
> > > +++++++++++++++++++
> > >  3 files changed, 60 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> > > b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> > > index 1311562d25cc..77054adcd9cf 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> > > +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> > > @@ -9,6 +9,7 @@
> > >  #include <linux/soc/mediatek/mtk-cmdq.h>
> > >  #include <linux/soc/mediatek/mtk-mmsys.h>
> > >  #include <linux/soc/mediatek/mtk-mutex.h>
> > > +#include "mtk_drm_ddp_comp.h"
> > >  #include "mtk_drm_plane.h"
> > >  #include "mtk_mdp_rdma.h"
> > >  
> > > @@ -82,6 +83,7 @@ void mtk_ovl_clk_disable(struct device *dev);
> > >  void mtk_ovl_config(struct device *dev, unsigned int w,
> > >  		    unsigned int h, unsigned int vrefresh,
> > >  		    unsigned int bpc, struct cmdq_pkt *cmdq_pkt);
> > > +u64 mtk_ovl_get_sec_port(struct mtk_ddp_comp *comp, unsigned int
> > > idx);
> > >  int mtk_ovl_layer_check(struct device *dev, unsigned int idx,
> > >  			struct mtk_plane_state *mtk_state);
> > >  void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > index 2bffe4245466..c18f76412a2e 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > > @@ -46,6 +46,7 @@
> > >  #define DISP_REG_OVL_ADDR(ovl, n)		((ovl)->data-
> > > >addr +
> > > 0x20 * (n))
> > >  #define DISP_REG_OVL_HDR_ADDR(ovl, n)		((ovl)->data-
> > > > addr + 0x20 * (n) + 0x04)
> > > 
> > >  #define DISP_REG_OVL_HDR_PITCH(ovl, n)		((ovl)->data-
> > > > addr + 0x20 * (n) + 0x08)
> > > 
> > > +#define DISP_REG_OVL_SECURE			0x0fc0
> > >  
> > >  #define GMC_THRESHOLD_BITS	16
> > >  #define GMC_THRESHOLD_HIGH	((1 << GMC_THRESHOLD_BITS) / 4)
> > > @@ -126,8 +127,19 @@ struct mtk_disp_ovl {
> > >  	const struct mtk_disp_ovl_data	*data;
> > >  	void				(*vblank_cb)(void *data);
> > >  	void				*vblank_cb_data;
> > > +	resource_size_t			regs_pa;
> > >  };
> > >  
> > > +u64 mtk_ovl_get_sec_port(struct mtk_ddp_comp *comp, unsigned int
> > > idx)
> > > +{
> > > +	if (comp->id == DDP_COMPONENT_OVL0)
> > > +		return BIT_ULL(CMDQ_SEC_DISP_OVL0);
> > > +	else if (comp->id == DDP_COMPONENT_OVL1)
> > > +		return BIT_ULL(CMDQ_SEC_DISP_OVL1);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > >  static irqreturn_t mtk_disp_ovl_irq_handler(int irq, void
> > > *dev_id)
> > >  {
> > >  	struct mtk_disp_ovl *priv = dev_id;
> > > @@ -449,8 +461,22 @@ void mtk_ovl_layer_config(struct device
> > > *dev,
> > > unsigned int idx,
> > >  			      DISP_REG_OVL_SRC_SIZE(idx));
> > >  	mtk_ddp_write_relaxed(cmdq_pkt, offset, &ovl->cmdq_reg, ovl-
> > > > regs,
> > > 
> > >  			      DISP_REG_OVL_OFFSET(idx));
> > > -	mtk_ddp_write_relaxed(cmdq_pkt, addr, &ovl->cmdq_reg, ovl-
> > > > regs,
> > > 
> > > -			      DISP_REG_OVL_ADDR(ovl, idx));
> > > +
> > > +	if (state->pending.is_secure) {
> > > +		const struct drm_format_info *fmt_info =
> > > drm_format_info(fmt);
> > > +		unsigned int buf_size = (pending->height - 1) *
> > > pending->pitch +
> > > +					pending->width * fmt_info-
> > > > cpp[0];
> > > 
> > > +
> > > +		mtk_ddp_write_mask(cmdq_pkt, BIT(idx), &ovl->cmdq_reg,
> > > ovl->regs,
> > > +				   DISP_REG_OVL_SECURE, BIT(idx));
> > > +		mtk_ddp_sec_write(cmdq_pkt, ovl->regs_pa +
> > > DISP_REG_OVL_ADDR(ovl, idx),
> > > +				  pending->addr, CMDQ_IWC_H_2_MVA, 0,
> > > buf_size, 0);
> > 
> > Mapping iova should be done when buffer allocation or some other
> > mapping function, instead of every OVL frame configuration. So the
> > size
> > should not be set here.
> > 
> > Regards,
> > CK
> > 
> 
> Since we can only get the secure handle when the plane updates, the
> buffer have to be mapped here every time.
> So I'll ask IOMMU owner to move this mapping process into allocation
> step, then we can remove the size here.
> 

After discuss with IOMMU owner, we can remove the size parameter.
I'll remove it in the next version.

Regards,
Jason-JH.Lin

> Regards,
> Jason-JH.Lin




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux