Re: [PATCH 05/13] spi: axi-spi-engine: add SPI offload support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 10, 2024 at 3:39 PM Mark Brown <broonie@xxxxxxxxxx> wrote:
>
> On Wed, Jan 10, 2024 at 01:49:46PM -0600, David Lechner wrote:
> > This adds an implementation of the SPI offload_ops to the AXI SPI Engine
> > driver to provide offload support.
> >
> > Offload lookup is done by device property lookup. SPI Engine commands
> > and tx data  are recorded by writing to offload-specific FIFOs in the
> > SPI Engine hardware.
>
> Glancing through here I'm not seeing anything here that handles DMA
> mapping, given that the controller will clearly be doing DMA here that
> seems surprising.

In the use case implemented in this series, the RX data is going to
DMA, but in general, that doesn't have to be the case. In theory, it
could get piped directly to a DSP or something like that. So I left
the RX DMA part out of the SPI controller and implemented as a
separate device in "iio: offload: add new PWM triggered DMA buffer
driver". The SPI controller itself isn't aware that it is connected to
DMA (i.e. there are no registers that have to be poked to enable DMA
or anything like that).





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux