On 10/01/2024 18:22, Petre Rodan wrote: > Add sleep-mode property present in some custom chips. > > This flag activates a special wakeup sequence prior to conversion. > > Signed-off-by: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx> > --- > .../bindings/iio/pressure/honeywell,hsc030pa.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml > index 89977b9f01cf..350da1d6991b 100644 > --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml > +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml > @@ -86,6 +86,15 @@ properties: > Maximum pressure value the sensor can measure in pascal. > To be specified only if honeywell,pressure-triplet is set to "NA". > > + honeywell,sleep-mode: "Sleep mode" naming suggests there are choices, like mode foo and mode bar. Probably you want something like "sleep-between-measurements" or something matching how does it work. > + description: | Do not need '|' unless you need to preserve formatting. > + 'Sleep Mode' is a special factory set mode of the chip that allows the > + sensor to power down between measurements. It is implemented only on > + special request, and it is an attribute not present in the HSC/SSC series > + nomenclature. > + Set in order to enable the special wakeup sequence prior to conversion. > + $ref: /schemas/types.yaml#/definitions/flag > + > vdd-supply: > description: > Provide VDD power to the sensor (either 3.3V or 5V depending on the chip) > @@ -140,6 +149,7 @@ examples: > honeywell,pressure-triplet = "NA"; > honeywell,pmin-pascal = <0>; > honeywell,pmax-pascal = <200000>; > + //honeywell,sleep-mode; Drop comment. > 2.41.0 > Best regards, Krzysztof
