Remove incorrect comment about required nodes by spec. In past gem3 was the
part of SOM specification but it has been revisit by introducting KR260.
Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
---
arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 4 ++--
arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index e7940067ff3c..b7b94254cc09 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -139,7 +139,7 @@ &sdhci1 { /* on CC with tuned parameters */
bus-width = <4>;
};
-&gem3 { /* required by spec */
+&gem3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gem3_default>;
@@ -166,7 +166,7 @@ phy0: ethernet-phy@1 {
};
};
-&pinctrl0 { /* required by spec */
+&pinctrl0 {
status = "okay";
pinctrl_uart1_default: uart1-default {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index f72312926299..1446c2b19de7 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -122,7 +122,7 @@ &sdhci1 { /* on CC with tuned parameters */
bus-width = <4>;
};
-&gem3 { /* required by spec */
+&gem3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gem3_default>;
@@ -149,7 +149,7 @@ phy0: ethernet-phy@1 {
};
};
-&pinctrl0 { /* required by spec */
+&pinctrl0 {
status = "okay";
pinctrl_uart1_default: uart1-default {
--
2.36.1
