Il 08/01/24 14:46, Frank Wunderlich ha scritto:
Am 8. Januar 2024 11:12:26 MEZ schrieb AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>:
Il 05/01/24 17:20, Frank Wunderlich ha scritto:
From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
Infracfg can also operate as reset controller, add support for it.
Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
---
drivers/clk/mediatek/clk-mt7988-infracfg.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/clk/mediatek/clk-mt7988-infracfg.c b/drivers/clk/mediatek/clk-mt7988-infracfg.c
index 8011ef278bea..1660a45349ff 100644
--- a/drivers/clk/mediatek/clk-mt7988-infracfg.c
+++ b/drivers/clk/mediatek/clk-mt7988-infracfg.c
@@ -14,6 +14,9 @@
#include "clk-gate.h"
#include "clk-mux.h"
#include <dt-bindings/clock/mediatek,mt7988-clk.h>
+#include <dt-bindings/reset/mediatek,mt7988-resets.h>
+
+#define INFRA_RST_SET_OFFSET 0x80
static DEFINE_SPINLOCK(mt7988_clk_lock);
@@ -249,12 +252,29 @@ static const struct mtk_gate infra_clks[] = {
GATE_INFRA3(CLK_INFRA_133M_PCIE_CK_P3, "infra_133m_pcie_ck_p3", "sysaxi_sel", 31),
};
+static u16 infra_rst_ofs[] = {
+ INFRA_RST_SET_OFFSET,
+};
+
+static u16 infra_idx_map[] = {
+ [MT7988_INFRA_RST0_THERM_CTRL_SWRST] = 0 * RST_NR_PER_BANK + 9,
The MT7988A datasheet says that INFRA_RST0 bit 9 is CONN2EMI_M0_GALS_SLV_SWRST, so
this is wrong: THERM_CTRL_SWRST is in the RST1 register, bit 9.
Also, I'm sure that you really want to add the PCIe MAC reset bit as well, to be
used with the PCIe driver...
[MT7988_INFRA_RST0_PEXTP_MAC_SWRST] = 0 * RST_NR_PER_BANK + 6,
[MT7988_INFRA_RST1_THERM_CTRL_SWRST] = 1 * RST_NR_PER_BANK + 9,
Yes you are right...i have only rst1 as screenshot,need to get the full datasheet or can you tell me base address for rst0? Need to change value of INFRA_RST_SET_OFFSET then to rst0 and check RST_NR_PER_BANK to be correct.
The datasheet is public ... [1] has it in the Resources paragraph :-)
Anyway, since I already have it here in front of me...
10001070 INFRA_GLOBALCON_RST0_SET
10001080 INFRA_GLOBALCON_RST1_SET
[1]: https://wiki.banana-pi.org/Banana_Pi_BPI-R4
Cheers,
Angelo
