On Fri, 15 Dec 2023 04:32:02 -0600 David Lechner <dlechner@xxxxxxxxxxxx> wrote: > This adds a new spi-rx-bus-channels property to the generic spi > peripheral property bindings. This property is used to describe > devices that have parallel data output channels. > > This property is different from spi-rx-bus-width in that the latter > means that we are reading multiple bits of a single word at one time > while the former means that we are reading single bits of multiple words > at the same time. > > Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx> > --- > > The rest of this series is ready to merge, so just looking for an ack from > Mark on this one. Mark, could you take a look at this SPI binding change when you have time? I don't want to apply it without your view on whether this makes sense from a general SPI point of view as we all hate maintaining bindings if they turn out to not be sufficiently future looking etc and we need to deprecate them in favour of something else. Thanks, Jonathan > > .../devicetree/bindings/spi/spi-peripheral-props.yaml | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml > index 15938f81fdce..1c8e71c18234 100644 > --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml > +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml > @@ -67,6 +67,18 @@ properties: > enum: [0, 1, 2, 4, 8] > default: 1 > > + spi-rx-bus-channels: > + description: > + The number of parallel channels for read transfers. The difference between > + this and spi-rx-bus-width is that a value N for spi-rx-bus-channels means > + the SPI bus is receiving one bit each of N different words at the same > + time whereas a value M for spi-rx-bus-width means that the bus is > + receiving M bits of a single word at the same time. It is also possible to > + use both properties at the same time, meaning the bus is receiving M bits > + of N different words at the same time. > + $ref: /schemas/types.yaml#/definitions/uint32 > + default: 1 > + > spi-rx-delay-us: > description: > Delay, in microseconds, after a read transfer. >
