On Wed, Dec 27, 2023 at 01:27:16PM -0500, Frank Li wrote:
> Avoid use get slot id by compared with register physical address. If there
> are more than 2 slots, compared logic will become complex.
>
> "linux,pci-domain" already exist at dts since commit:
> commit (c0b70f05c87f3b arm64: dts: imx8mq: use_dt_domains for pci node).
>
> So it is safe to remove compare basic address code:
> ...
> if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
> imx6_pcie->controller_id = 1;
> ...
>
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
One comment below. With that fixed,
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>
> Notes:
> Change from v3 to v4
> - remove compare basic address logic
> Change from v2 to v3
> - none
> Change from v1 to v2
> - fix of_get_pci_domain_nr return value check logic
>
> drivers/pci/controller/dwc/pci-imx6.c | 17 +++++++++--------
> 1 file changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 294f61a9c6fd9..332c392f8e5bc 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -33,6 +33,7 @@
> #include <linux/pm_domain.h>
> #include <linux/pm_runtime.h>
>
> +#include "../../pci.h"
> #include "pcie-designware.h"
>
> #define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9)
> @@ -40,7 +41,6 @@
> #define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11)
> #define IMX8MQ_GPR_PCIE_VREG_BYPASS BIT(12)
> #define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8)
> -#define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000
>
> #define to_imx6_pcie(x) dev_get_drvdata((x)->dev)
>
> @@ -1279,13 +1279,14 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> "Failed to get PCIEPHY reset control\n");
> }
>
> - switch (imx6_pcie->drvdata->variant) {
> - case IMX7D:
> - if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
> - imx6_pcie->controller_id = 1;
> - default:
> - break;
> - }
> + /* Using linux,pci-domain as PCI slot id */
> + imx6_pcie->controller_id = of_get_pci_domain_nr(node);
> + /* If there are not "linux,pci-domain" in dts file, means only 1 controller */
"If there are no "linux,pci-domain" property specified in DT, then assume only
one controller is available."
- Mani
> + if (imx6_pcie->controller_id == -EINVAL)
> + imx6_pcie->controller_id = 0;
> + else if (imx6_pcie->controller_id < 0)
> + return dev_err_probe(dev, imx6_pcie->controller_id,
> + "linux,pci-domain have wrong value\n");
>
> /* Grab turnoff reset */
> imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்
