Re: [PATCH v7 02/16] PCI: imx6: Simplify phy handling by using by using IMX6_PCIE_FLAG_HAS_PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jan 06, 2024 at 09:03:23PM +0530, Manivannan Sadhasivam wrote:
> On Wed, Dec 27, 2023 at 01:27:13PM -0500, Frank Li wrote:
> > Refactors the phy handling logic in the imx6 PCI driver by adding
> > IMX6_PCIE_FLAG_HAS_PHY bitmask define for drvdata::flags.
> > 
> > The drvdata::flags and a bitmask ensures a cleaner and more scalable
> > switch-case structure for handling phy.
> > 
> > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > ---
> > 
> > Notes:
> >     Change from v4 to v5:
> >     - none, Keep IMX6_PCIE_FLAG_HAS_PHY to indicate dts mismatch when platform
> >     require phy suppport.
> >     
> >     Change from v1 to v3:
> >     - none
> > 
> >  drivers/pci/controller/dwc/pci-imx6.c | 23 ++++++++++++++++-------
> >  1 file changed, 16 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> > index 50d9faaa17f71..4d620249f3d52 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -60,6 +60,9 @@ enum imx6_pcie_variants {
> >  #define IMX6_PCIE_FLAG_IMX6_PHY			BIT(0)
> >  #define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE	BIT(1)
> >  #define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND		BIT(2)
> > +#define IMX6_PCIE_FLAG_HAS_PHY			BIT(3)
> 
> Every PCIe setup requires PHY for its operation. Perhaps you are referring to
> external PHY? If so, please rename this to IMX6_PCIE_FLAG_HAS_EXT_PHY.

Actually, it means use phy driver. How about using IMX6_PCIE_HAS_PHYDRV?

> 
> > +
> > +#define imx6_check_flag(pci, val)     (pci->drvdata->flags & val)
> >  
> >  #define IMX6_PCIE_MAX_CLKS       6
> >  
> > @@ -1277,6 +1280,13 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> >  	if (ret)
> >  		return ret;
> >  
> > +	if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_PHY)) {
> 
> IMO, we would not need these kind of checks in the driver if the DT binding is
> properly validated using schema. But folks always want to validate "broken DT"
> in the drivers :(
> 
> But I'm fine with this check for now since not everyone agree with above.
> 
> - Mani
> 
> > +		imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
> > +		if (IS_ERR(imx6_pcie->phy))
> > +			return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
> > +					     "failed to get pcie phy\n");
> > +	}
> > +
> >  	switch (imx6_pcie->drvdata->variant) {
> >  	case IMX7D:
> >  		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
> > @@ -1306,11 +1316,6 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> >  			return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset),
> >  					     "failed to get pcie apps reset control\n");
> >  
> > -		imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
> > -		if (IS_ERR(imx6_pcie->phy))
> > -			return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
> > -					     "failed to get pcie phy\n");
> > -
> >  		break;
> >  	default:
> >  		break;
> > @@ -1444,13 +1449,15 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> >  	},
> >  	[IMX8MM] = {
> >  		.variant = IMX8MM,
> > -		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> > +		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
> > +			 IMX6_PCIE_FLAG_HAS_PHY,
> >  		.gpr = "fsl,imx8mm-iomuxc-gpr",
> >  		.clk_names = {"pcie_bus", "pcie", "pcie_aux"},
> >  	},
> >  	[IMX8MP] = {
> >  		.variant = IMX8MP,
> > -		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> > +		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
> > +			 IMX6_PCIE_FLAG_HAS_PHY,
> >  		.gpr = "fsl,imx8mp-iomuxc-gpr",
> >  		.clk_names = {"pcie_bus", "pcie", "pcie_aux"},
> >  	},
> > @@ -1462,12 +1469,14 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> >  	},
> >  	[IMX8MM_EP] = {
> >  		.variant = IMX8MM_EP,
> > +		.flags = IMX6_PCIE_FLAG_HAS_PHY,
> >  		.mode = DW_PCIE_EP_TYPE,
> >  		.gpr = "fsl,imx8mm-iomuxc-gpr",
> >  		.clk_names = {"pcie_bus", "pcie", "pcie_aux"},
> >  	},
> >  	[IMX8MP_EP] = {
> >  		.variant = IMX8MP_EP,
> > +		.flags = IMX6_PCIE_FLAG_HAS_PHY,
> >  		.mode = DW_PCIE_EP_TYPE,
> >  		.gpr = "fsl,imx8mp-iomuxc-gpr",
> >  		.clk_names = {"pcie_bus", "pcie", "pcie_aux"},
> > -- 
> > 2.34.1
> > 
> 
> -- 
> மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux