Re: [PATCH] arm64: dts: qcom: ipq6018: add #power-domain-cells for gcc node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 1/4/2024 5:53 PM, Dmitry Baryshkov wrote:
On Thu, 4 Jan 2024 at 10:06, Fenglin Wu via B4 Relay
<devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx> wrote:

From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>

Property '#power-domain-cells' is required as per defined in qcom,gcc.yaml
so add it for ipq6018 gcc device node to eliminate following warning in
dtbs_check:

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb: gcc@1800000:
         '#power-domain-cells' is a required property
from schema $id: http://devicetree.org/schemas/clock/qcom,gcc-ipq6018.yaml#

But ipq6018 doesn't implement GDSC support. So for the sake of fixing
the warning you are adding a bogus property.

I agree. However, there are also some gcc drivers not implementing GDSC support but the bindings are adding '#power-domain-cells' in the DT example, such as: qcom,gcc-apq8064.yaml, qcom,gcc-ipq4019.yaml, qcom,gcc-ipq6018.yaml, qcom,gcc-ipq8064.yaml, qcom,gcc-msm8660.yaml.

Actually I thought that maybe we should do a clean up by removing '#power-domain-cells' out of the qcom,gcc.yaml binding and only adding it into individual qcom,gcc-xxx.yaml for the driver which has implemented GDSC support. I checked this with Taniya offline, but she prefers only fixing it in ipq6018.dtsi as it doesn't hurt anything by adding the property, and she expects the GDSC support should be existing in most of qcom,gcc drivers especially the newer Qcom chipsets.



Signed-off-by: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/ipq6018.dtsi | 1 +
  1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 39cd6b76b4c1..54914912d610 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -386,6 +386,7 @@ gcc: gcc@1800000 {
                         reg = <0x0 0x01800000 0x0 0x80000>;
                         clocks = <&xo>, <&sleep_clk>;
                         clock-names = "xo", "sleep_clk";
+                       #power-domain-cells = <1>;
                         #clock-cells = <1>;
                         #reset-cells = <1>;
                 };

---
base-commit: 17cb8a20bde66a520a2ca7aad1063e1ce7382240
change-id: 20240103-gcc-docs-update-fa604579e468

Best regards,
--
Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>








[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux