Hi Bartosz, >On Thu, Dec 28, 2023 at 11:48 AM Tzuyi Chang <tychang@xxxxxxxxxxx> >wrote: >> >> These patches add the bindings and the gpio driver for Realtek >> DHC(Digital Home Center) RTD SoCs, including RTD1295, RTD1395, >> RTD1619, RTD1319, RTD1619B, RTD1319D and RTD1315E. >> >> Change log: >> v4->v5: >> 1. Add more description in the Kconfig. >> 2. Add comment for the counter-intuitive number 31. >> 3. Convert to use cleanup API and module_platform_driver() macro. >> 4. Simplify some of the code as suggested in patch v4. >> v3->v4: >> 1. Arrange the compatible list in alphanumerical order. >> 2. Remove the size check for the offset array. >> 3. Add the debounce callback. >> 4. Conducted a review of the critical section, employing raw_spinlock_t for >locking purposes. >> 5. Add gpiochip_enable_irq/gpiochip_disable_irq to fulfill the immutability >requirements. >> 6. Use irqd_to_hwirq to get hwirq. >> v2->v3: >> 1. Remove generic compatible and use SoC-specific compatible instead. >> 2. Add the missing descriptions for the rtd_gpio_info structure members. >> 3. Assign gpio_chip fwnode. >> v1->v2: >> 1. Add description for DHC RTD SoCs in the bindings. >> 2. Revise the compatible names in the bindings. >> 3. Transitioned from OF API to platform_device API. >> 4. Use u8 for the offset array within the rtd_gpio_info structure. >> 5. Record the size of each array within the rtd_gpio_info structure and >> implement checks to prevent out-of-bounds access. >> 6. Use GPIOLIB_IRQCHIP helpers to register interrupts. >> 7. Use dynamic allocation for GPIO base. >> >> Tzuyi Chang (2): >> dt-bindings: gpio: realtek: Add realtek,rtd-gpio >> Add GPIO support for Realtek DHC(Digital Home Center) RTD SoCs. >> >> .../bindings/gpio/realtek,rtd-gpio.yaml | 69 ++ >> drivers/gpio/Kconfig | 13 + >> drivers/gpio/Makefile | 1 + >> drivers/gpio/gpio-rtd.c | 604 >++++++++++++++++++ >> 4 files changed, 687 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml >> create mode 100644 drivers/gpio/gpio-rtd.c >> >> -- >> 2.43.0 >> > >I applied this series. For the future: the commit subject should have the "gpio: >rtd: ..." prefix. I added it this time. > Thank you. I'll make sure to take note of it next time. Thanks, Tzuyi Chang