This series adds DT bindings and dts descriptions for SolidRun AM642 based SoM and Hummingboard EVB. Additionally a commit from downstream vendor kernel are included, enhancing support for pru based ethernet. I wasn't sure how to properly annotate it in commit description / signed-off area ...: 1. add description for "Industrial Ethernet Peripherals" (IEP) to am64 https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm64/boot/dts/ti/k3-am64-main.dtsi?h=ti-linux-6.1.y-cicd&id=5afb73d82a014b59462162d960b350b8c58e5ae6 IEP is already supported in-tree by a driver, and used in k3-am65-main.dtsi. Unfortunately dtbs_check reported many problems, I put them up as rfc in the commit description of patch #2. Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx> --- Josua Mayer (4): dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T arm64: dts: add description for solidrun am642 som and evaluation board arm64: dts: ti: hummingboard-t: add descriptions for m.2 pci-e and usb-3 arm64: dts: ti: am642-sr-som: enable iep for pru ethernet ports Suman Anna (1): arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes Documentation/devicetree/bindings/arm/ti/k3.yaml | 7 + arch/arm64/boot/dts/ti/Makefile | 3 + arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 24 + .../boot/dts/ti/k3-am642-hummingboard-t-pcie.dts | 31 + .../boot/dts/ti/k3-am642-hummingboard-t-usb3.dts | 37 ++ arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dts | 333 +++++++++++ arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi | 639 +++++++++++++++++++++ 7 files changed, 1074 insertions(+) --- base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86 change-id: 20240101-add-am64-som-51a1ca47edf3 Sincerely, -- Josua Mayer <josua@xxxxxxxxxxxxx>
