Il 02/01/24 21:59, Rafał Miłecki ha scritto:
From: Rafał Miłecki <rafal@xxxxxxxxxx>
MT7988A (AKA MediaTek Filogic 880) is a quad-core ARM Cortex-A73
platform designed for Wi-Fi 7 devices (there is no wireless on SoC
though). The first public MT7988A device is Banana Pi BPI-R4.
Many SoC parts remain to be added (they need their own bindings or
depend on missing clocks). Those present block however are correct and
having base .dtsi will help testing & working on missing stuff.
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../dts/mediatek/mt7988a-bananapi-bpi-r4.dts | 11 ++
arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 149 ++++++++++++++++++
3 files changed, 161 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 1e6f91731e92..0a189d5d8006 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
new file mode 100644
index 000000000000..efc4ad0b08b8
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7988a.dtsi"
+
+/ {
+ compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+ model = "Banana Pi BPI-R4";
+ chassis-type = "embedded";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
new file mode 100644
index 000000000000..0f2ae9c7aef7
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt7986a";
Why is the compatible describing MT798*6*A instead of MT7988A? Please fix.
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a73";
+ reg = <0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a73";
+ reg = <0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a73";
+ reg = <0x2>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a73";
+ reg = <0x3>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+ };
+
+ oscillator-40m {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ #clock-cells = <0>;
+ clock-output-names = "clkxtal";
+ };
+
+ pmu {
+ compatible = "arm,cortex-a73-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ reserved-memory {
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ /* 320 KiB reserved for ARM Trusted Firmware (BL31 and BL32) */
+ secmon@43000000 {
This is board specific (actually, it is bootloader specific!), so please move it
to your board dts(i).
+ reg = <0 0x43000000 0 0x50000>;
+ no-map;
+ };
+
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ reg = <0 0x0c000000 0 0x40000>, /* GICD */
+ <0 0x0c080000 0 0x200000>, /* GICR */
+ <0 0x0c400000 0 0x2000>, /* GICC */
+ <0 0x0c410000 0 0x1000>, /* GICH */
+ <0 0x0c420000 0 0x2000>; /* GICV */
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ watchdog@1001c000 {
+ compatible = "mediatek,mt7988-wdt";
+ reg = <0 0x1001c000 0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
Those thermal zones will not work, as they have no thermal-sensors - as this
node is right now, it will produce a probe error and nothing else: please
either drop it entirely or add support for the thermal sensors (lvts or auxadc?)
and fix this node to use them.
+ trips {
+ crit {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ hot {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ active-high {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "active";
Active cooling is board specific. Keep only critical/hot trips in the SoC DT.
+ };
+
+ active-med {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ active-low {
+ temperature = <40000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
Regards,
Angelo
