Re: [PATCH v4 1/3] dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/12/2023 07:03, Chunfeng Yun wrote:
> For Gen1 isoc-in endpoint on controller before about SSUSB IPM v1.6.0, it
> still send out unexpected ACK after receiving a short packet in burst
> transfer, this will cause an exception on connected device, specially for
> a 4k camera.
> Add a quirk property "rx-fifo-depth" to work around this hardware issue,
> prefer to use 3k bytes;
> The side-effect is that may cause performance drop about 10%, including
> bulk transfer.
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> ---
> v4: change rx-fifo size in bytes

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux