[PATCH 1/2] arm64: dts: mediatek: mt7986: reorder properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Rafał Miłecki <rafal@xxxxxxxxxx>

Use order described as preferred in DTS Coding Style. Mostly just move
"compatible", "reg" and "ranges" properties. In two nodes also move
vendor-prefixed props down.

Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 67 ++++++++++++-----------
 1 file changed, 34 insertions(+), 33 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index fc751e049953..23feeff881de 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -27,34 +27,34 @@ cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu0: cpu@0 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
-			device_type = "cpu";
-			enable-method = "psci";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 	};
@@ -131,22 +131,22 @@ timer {
 	};
 
 	soc {
-		#address-cells = <2>;
-		#size-cells = <2>;
 		compatible = "simple-bus";
 		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
 		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
 			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
 			      <0 0x0c080000 0 0x80000>,  /* GICR */
 			      <0 0x0c400000 0 0x2000>,   /* GICC */
 			      <0 0x0c410000 0 0x1000>,   /* GICH */
 			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupt-parent = <&gic>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
 		};
 
 		infracfg: infracfg@10001000 {
@@ -311,9 +311,9 @@ i2c0: i2c@11008000 {
 
 		spi0: spi@1100a000 {
 			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100a000 0 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0 0x1100a000 0 0x100>;
 			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_MPLL_D2>,
 				 <&topckgen CLK_TOP_SPI_SEL>,
@@ -325,9 +325,9 @@ spi0: spi@1100a000 {
 
 		spi1: spi@1100b000 {
 			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100b000 0 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0 0x1100b000 0 0x100>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_MPLL_D2>,
 				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
@@ -389,7 +389,6 @@ mmc0: mmc@11230000 {
 		};
 
 		thermal: thermal@1100c800 {
-			#thermal-sensor-cells = <1>;
 			compatible = "mediatek,mt7986-thermal";
 			reg = <0 0x1100c800 0 0x800>;
 			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -397,30 +396,30 @@ thermal: thermal@1100c800 {
 				 <&infracfg CLK_INFRA_ADC_26M_CK>,
 				 <&infracfg CLK_INFRA_ADC_FRC_CK>;
 			clock-names = "therm", "auxadc", "adc_32k";
-			mediatek,auxadc = <&auxadc>;
-			mediatek,apmixedsys = <&apmixedsys>;
 			nvmem-cells = <&thermal_calibration>;
 			nvmem-cell-names = "calibration-data";
+			#thermal-sensor-cells = <1>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
 		};
 
 		pcie: pcie@11280000 {
 			compatible = "mediatek,mt7986-pcie",
 				     "mediatek,mt8192-pcie";
+			reg = <0x00 0x11280000 0x00 0x4000>;
+			reg-names = "pcie-mac";
+			ranges = <0x82000000 0x00 0x20000000 0x00
+				  0x20000000 0x00 0x10000000>;
 			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			reg = <0x00 0x11280000 0x00 0x4000>;
-			reg-names = "pcie-mac";
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			bus-range = <0x00 0xff>;
-			ranges = <0x82000000 0x00 0x20000000 0x00
-				  0x20000000 0x00 0x10000000>;
 			clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
 				 <&infracfg CLK_INFRA_IPCIE_CK>,
 				 <&infracfg CLK_INFRA_IPCIER_CK>,
 				 <&infracfg CLK_INFRA_IPCIEB_CK>;
 			clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
-			status = "disabled";
 
 			phys = <&pcie_port PHY_TYPE_PCIE>;
 			phy-names = "pcie-phy";
@@ -431,6 +430,8 @@ pcie: pcie@11280000 {
 					<0 0 0 2 &pcie_intc 1>,
 					<0 0 0 3 &pcie_intc 2>,
 					<0 0 0 4 &pcie_intc 3>;
+			status = "disabled";
+
 			pcie_intc: interrupt-controller {
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
@@ -441,9 +442,9 @@ pcie_intc: interrupt-controller {
 		pcie_phy: t-phy {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
+			ranges;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges;
 			status = "disabled";
 
 			pcie_port: pcie-phy@11c00000 {
@@ -468,9 +469,9 @@ thermal_calibration: calib@274 {
 		usb_phy: t-phy@11e10000 {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
+			ranges = <0 0 0x11e10000 0x1700>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0 0x11e10000 0x1700>;
 			status = "disabled";
 
 			u2port0: usb-phy@0 {
@@ -498,11 +499,11 @@ u2port1: usb-phy@1000 {
 		};
 
 		ethsys: syscon@15000000 {
-			 #address-cells = <1>;
-			 #size-cells = <1>;
 			 compatible = "mediatek,mt7986-ethsys",
 				      "syscon";
 			 reg = <0 0x15000000 0 0x1000>;
+			 #address-cells = <1>;
+			 #size-cells = <1>;
 			 #clock-cells = <1>;
 			 #reset-cells = <1>;
 		};
@@ -579,26 +580,26 @@ eth: ethernet@15100000 {
 					  <&topckgen CLK_TOP_SGM_325M_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
 						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			#reset-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			mediatek,ethsys = <&ethsys>;
 			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
 			mediatek,wed-pcie = <&wed_pcie>;
 			mediatek,wed = <&wed0>, <&wed1>;
-			#reset-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
 		wifi: wifi@18000000 {
 			compatible = "mediatek,mt7986-wmac";
+			reg = <0 0x18000000 0 0x1000000>,
+			      <0 0x10003000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>;
 			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
 			reset-names = "consys";
 			clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
 				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
 			clock-names = "mcu", "ap2conn";
-			reg = <0 0x18000000 0 0x1000000>,
-			      <0 0x10003000 0 0x1000>,
-			      <0 0x11d10000 0 0x1000>;
 			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.35.3





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux