Move tas2563 from tas2562 driver to tas2781 driver to unbind tas2563 from tas2562 driver code and bind it to tas2781 driver code, because tas2563 only work in bypass-DSP mode with tas2562 driver. In order to enable DSP mode for tas2563, it has been moved to tas2781 driver. As to the hardware part, such as register setting and DSP firmware, all these are stored in the binary firmware. What tas2781 drivder dooes is to parse the firmware and download it to the chip, then power on the chip. So, tas2781 driver can be resued as tas2563 driver. Only attention will be paid to downloading corresponding firmware. Signed-off-by: Shenghao Ding <shenghao-ding@xxxxxx> --- Change in v4: - Add tas2563 to tas2781 driver. - Add more comments on why move tas2563 to tas2781 driver. - Provide rationale in terms of bindings and hardware, not in terms of driver. Or at least not only. - In all cases, to make the lists ordered by a chip model, tas2563 is first, tas2781 is second. --- sound/soc/codecs/tas2781-i2c.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 55cd5e3c23a5..bd5ef4ff96fe 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -1,13 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 // -// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier +// ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier // // Copyright (C) 2022 - 2023 Texas Instruments Incorporated // https://www.ti.com // -// The TAS2781 driver implements a flexible and configurable +// The TAS2563/TAS2781 driver implements a flexible and configurable // algo coefficient setting for one, two, or even multiple -// TAS2781 chips. +// TAS2563/TAS2781 chips. // // Author: Shenghao Ding <shenghao-ding@xxxxxx> // Author: Kevin Lu <kevin-lu@xxxxxx> @@ -32,6 +32,7 @@ #include <sound/tas2781-tlv.h> static const struct i2c_device_id tasdevice_id[] = { + { "tas2563", TAS2563 }, { "tas2781", TAS2781 }, {} }; @@ -39,6 +40,7 @@ MODULE_DEVICE_TABLE(i2c, tasdevice_id); #ifdef CONFIG_OF static const struct of_device_id tasdevice_of_match[] = { + { .compatible = "ti,tas2563" }, { .compatible = "ti,tas2781" }, {}, }; -- 2.34.1
