On 2023/12/27 23:49, Lorenzo Pieralisi wrote: > On Thu, Dec 14, 2023 at 03:28:27PM +0800, Minda Chen wrote: >> Move setup functions to common pcie-plda-host.c. So these two functions >> can be re-used. >> >> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx> >> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> >> --- >> drivers/pci/controller/plda/Kconfig | 4 + >> drivers/pci/controller/plda/Makefile | 1 + >> .../pci/controller/plda/pcie-microchip-host.c | 59 -------------- >> drivers/pci/controller/plda/pcie-plda-host.c | 80 +++++++++++++++++++ >> drivers/pci/controller/plda/pcie-plda.h | 5 ++ >> 5 files changed, 90 insertions(+), 59 deletions(-) >> create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c >> >> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig >> index 5cb3be4fc98c..e54a82ee94f5 100644 >> --- a/drivers/pci/controller/plda/Kconfig >> +++ b/drivers/pci/controller/plda/Kconfig >> @@ -3,10 +3,14 @@ >> menu "PLDA-based PCIe controllers" >> depends on PCI >> >> +config PCIE_PLDA_HOST >> + bool >> + >> config PCIE_MICROCHIP_HOST >> tristate "Microchip AXI PCIe controller" >> depends on PCI_MSI && OF >> select PCI_HOST_COMMON >> + select PCIE_PLDA_HOST >> help >> Say Y here if you want kernel to support the Microchip AXI PCIe >> Host Bridge driver. >> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile >> index e1a265cbf91c..4340ab007f44 100644 >> --- a/drivers/pci/controller/plda/Makefile >> +++ b/drivers/pci/controller/plda/Makefile >> @@ -1,2 +1,3 @@ >> # SPDX-License-Identifier: GPL-2.0 >> +obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o >> obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o >> diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c >> index 31ca8d44ee2a..2e79bcc7c0a5 100644 >> --- a/drivers/pci/controller/plda/pcie-microchip-host.c >> +++ b/drivers/pci/controller/plda/pcie-microchip-host.c >> @@ -838,65 +838,6 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port) >> return mc_allocate_msi_domains(port); >> } >> >> -static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, >> - phys_addr_t axi_addr, phys_addr_t pci_addr, >> - size_t size) >> -{ >> - u32 atr_sz = ilog2(size) - 1; >> - u32 val; >> - >> - if (index == 0) >> - val = PCIE_CONFIG_INTERFACE; >> - else >> - val = PCIE_TX_RX_INTERFACE; >> - >> - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + >> - ATR0_AXI4_SLV0_TRSL_PARAM); >> - >> - val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) | >> - ATR_IMPL_ENABLE; >> - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + >> - ATR0_AXI4_SLV0_SRCADDR_PARAM); >> - >> - val = upper_32_bits(axi_addr); >> - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + >> - ATR0_AXI4_SLV0_SRC_ADDR); >> - >> - val = lower_32_bits(pci_addr); >> - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + >> - ATR0_AXI4_SLV0_TRSL_ADDR_LSB); >> - >> - val = upper_32_bits(pci_addr); >> - writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + >> - ATR0_AXI4_SLV0_TRSL_ADDR_UDW); >> - >> - val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); >> - val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT); >> - writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); >> - writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR); >> -} >> - >> -static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge, >> - struct plda_pcie_rp *port) >> -{ >> - void __iomem *bridge_base_addr = port->bridge_addr; >> - struct resource_entry *entry; >> - u64 pci_addr; >> - u32 index = 1; >> - >> - resource_list_for_each_entry(entry, &bridge->windows) { >> - if (resource_type(entry->res) == IORESOURCE_MEM) { >> - pci_addr = entry->res->start - entry->offset; >> - plda_pcie_setup_window(bridge_base_addr, index, >> - entry->res->start, pci_addr, >> - resource_size(entry->res)); >> - index++; >> - } >> - } >> - >> - return 0; >> -} >> - >> static inline void mc_clear_secs(struct mc_pcie *port) >> { >> void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR; >> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c >> new file mode 100644 >> index 000000000000..19131181897f >> --- /dev/null >> +++ b/drivers/pci/controller/plda/pcie-plda-host.c >> @@ -0,0 +1,80 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * PLDA PCIe XpressRich host controller driver >> + * >> + * Copyright (C) 2023 Microchip Co. Ltd >> + * >> + * Author: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx> >> + */ >> + >> +#include <linux/irqchip/chained_irq.h> >> +#include <linux/irqdomain.h> >> +#include <linux/msi.h> >> +#include <linux/of_address.h> >> +#include <linux/of_pci.h> >> +#include <linux/pci_regs.h> >> +#include <linux/pci-ecam.h> >> +#include <linux/platform_device.h> > > Do you really require these headers ? Not in this patch, > in later patches and that's why every header should be > added when it is really needed. > > Lorenzo > OK, I will change this. thanks. >> + >> +#include "pcie-plda.h" >> + >> +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, >> + phys_addr_t axi_addr, phys_addr_t pci_addr, >> + size_t size) >> +{ >> + u32 atr_sz = ilog2(size) - 1; >> + u32 val; >> + >> + if (index == 0) >> + val = PCIE_CONFIG_INTERFACE; >> + else >> + val = PCIE_TX_RX_INTERFACE; >> + >> + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + >> + ATR0_AXI4_SLV0_TRSL_PARAM); >> + >> + val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) | >> + ATR_IMPL_ENABLE; >> + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + >> + ATR0_AXI4_SLV0_SRCADDR_PARAM); >> + >> + val = upper_32_bits(axi_addr); >> + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + >> + ATR0_AXI4_SLV0_SRC_ADDR); >> + >> + val = lower_32_bits(pci_addr); >> + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + >> + ATR0_AXI4_SLV0_TRSL_ADDR_LSB); >> + >> + val = upper_32_bits(pci_addr); >> + writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + >> + ATR0_AXI4_SLV0_TRSL_ADDR_UDW); >> + >> + val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); >> + val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT); >> + writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); >> + writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR); >> +} >> +EXPORT_SYMBOL_GPL(plda_pcie_setup_window); >> + >> +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge, >> + struct plda_pcie_rp *port) >> +{ >> + void __iomem *bridge_base_addr = port->bridge_addr; >> + struct resource_entry *entry; >> + u64 pci_addr; >> + u32 index = 1; >> + >> + resource_list_for_each_entry(entry, &bridge->windows) { >> + if (resource_type(entry->res) == IORESOURCE_MEM) { >> + pci_addr = entry->res->start - entry->offset; >> + plda_pcie_setup_window(bridge_base_addr, index, >> + entry->res->start, pci_addr, >> + resource_size(entry->res)); >> + index++; >> + } >> + } >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems); >> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h >> index 363fcbbaf6ec..3deefd35fa5a 100644 >> --- a/drivers/pci/controller/plda/pcie-plda.h >> +++ b/drivers/pci/controller/plda/pcie-plda.h >> @@ -120,4 +120,9 @@ struct plda_pcie_rp { >> void __iomem *bridge_addr; >> }; >> >> +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, >> + phys_addr_t axi_addr, phys_addr_t pci_addr, >> + size_t size); >> +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge, >> + struct plda_pcie_rp *port); >> #endif >> -- >> 2.17.1 >>