[PATCH v5 3/3] riscv: dts: sophgo: add uart clock for Sophgo CV1800 series SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add missing clocks of uart node for CV1800B and CV1812H.

Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxxxx>
---
 arch/riscv/boot/dts/sophgo/cv18xx.dtsi | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
index 6ea1b2784db9..7c88cbe8e91d 100644
--- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
@@ -5,6 +5,7 @@
  */

 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/sophgo,cv1800.h>

 / {
 	#address-cells = <1>;
@@ -135,7 +136,8 @@ uart0: serial@4140000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04140000 0x100>;
 			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART0>, <&clk CLK_APB_UART0>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -145,7 +147,8 @@ uart1: serial@4150000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04150000 0x100>;
 			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART1>, <&clk CLK_APB_UART1>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -155,7 +158,8 @@ uart2: serial@4160000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04160000 0x100>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART2>, <&clk CLK_APB_UART2>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -165,7 +169,8 @@ uart3: serial@4170000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x04170000 0x100>;
 			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART3>, <&clk CLK_APB_UART3>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -175,7 +180,8 @@ uart4: serial@41c0000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x041c0000 0x100>;
 			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc>;
+			clocks = <&clk CLK_UART4>, <&clk CLK_APB_UART4>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
--
2.43.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux