On 25/12/2023 06:39, Shenghao Ding wrote: > Move tas2563 from tas2562.yaml to tas2781.yaml, because tas2563 only work > in bypass-DSP mode with tas2562 driver. In oder to enable DSP mode for > tas2563, it has been moved to tas2781 driver. As to the hardware part, > such as register setting and DSP firmware, all these are stored in the > binary firmware. What tas2781 drivder dooes is to parse the firmware and > download them to the tas2781 or tas2563, then power on tas2781 or tas2563. > So, tas2781 driver can be resued as tas2563 driver。 Only attention will > be paid to downloading corresponding firmware. > > Signed-off-by: Shenghao Ding <shenghao-ding@xxxxxx> > > --- > Change in v3: > - remove tas2563, which will be move to tas2781 driver > - Add more comments on why move tas2563 to tas2781 driver > - provide rationale in terms of bindings and hardware, not in terms of driver. > Or at least not only. How did you implement my comment about squashing? If you decided not to implement it, why not dropping a note? Best regards, Krzysztof
