Move tas2563 from tas2562.yaml to tas2781.yaml, because tas2563 only work in bypass-DSP mode with tas2562 driver. In oder to enable DSP mode for tas2563, it has been moved to tas2781 driver. As to the hardware part, such as register setting and DSP firmware, all these are stored in the binary firmware. What tas2781 drivder dooes is to parse the firmware and download them to the tas2781 or tas2563, then power on tas2781 or tas2563. So, tas2781 driver can be resued as tas2563 driver. Only attention will be paid to downloading corresponding firmware. Signed-off-by: Shenghao Ding <shenghao-ding@xxxxxx> --- Change in v3: - Add devicetree list and other list of necessary people and lists to CC - Express Compatibility in the bindings - Add more comments on why move tas2563 to tas2781 driver - Provide rationale in terms of bindings and hardware, not in terms of driver. Or at least not only. --- .../devicetree/bindings/sound/ti,tas2781.yaml | 66 ++++++++++++++----- 1 file changed, 51 insertions(+), 15 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml index a69e6c223308..bbe8e5f2c013 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -5,36 +5,72 @@ $id: http://devicetree.org/schemas/sound/ti,tas2781.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Texas Instruments TAS2781 SmartAMP +title: Texas Instruments TAS2781/TAS2563 SmartAMP maintainers: - Shenghao Ding <shenghao-ding@xxxxxx> description: - The TAS2781 is a mono, digital input Class-D audio amplifier - optimized for efficiently driving high peak power into small - loudspeakers. An integrated on-chip DSP supports Texas Instruments - Smart Amp speaker protection algorithm. The integrated speaker - voltage and current sense provides for real time + The TAS2781/TAS2563 is a mono, digital input Class-D audio + amplifier optimized for efficiently driving high peak power into + small loudspeakers. An integrated on-chip DSP supports Texas + Instruments Smart Amp speaker protection algorithm. The + integrated speaker voltage and current sense provides for real time monitoring of loudspeaker behavior. allOf: - $ref: dai-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - ti,tas2781 + then: + properties: + reg: + description: + I2C address, in multiple AMP case, all the i2c address + aggregate as one Audio Device to support multiple audio slots. + maxItems: 8 + minItems: 1 + items: + minimum: 0x38 + maximum: 0x3f + else: + properties: + reg: + description: + I2C address, in multiple AMP case, all the i2c address + aggregate as one Audio Device to support multiple audio slots. + maxItems: 4 + minItems: 1 + items: + minimum: 0x4c + maximum: 0x4f properties: compatible: + description: | + ti,tas2781: 24-V Class-D Amplifier with Real Time Integrated Speaker + Protection and Audio Processing, 16/20/24/32bit stereo I2S or + multichannel TDM. + + ti,tas2563: 6.1-W Boosted Class-D Audio Amplifier With Integrated + DSP and IV Sense, 16/20/24/32bit stereo I2S or multichannel TDM. enum: - ti,tas2781 + - ti,tas2563 + # Tas781 driver can support both tas2563 and tas2781, because the + # hardware part in the driver code, such as register setting and DSP + # firmware, all these are stored in the binary firmware. What drivder + # dooes is to parse the firmware and download it to the tas2781 or + # tas2563, then control tas2781 or tas2563 to power on/off or switch + # different dsp params. So, tas2781 driver can be resued as tas2563 + # driver. Only attention will be paid to downloading corresponding + # firmware. - reg: - description: - I2C address, in multiple tas2781s case, all the i2c address - aggregate as one Audio Device to support multiple audio slots. - maxItems: 8 - minItems: 1 - items: - minimum: 0x38 - maximum: 0x3f + reg: true reset-gpios: maxItems: 1 -- 2.34.1
