On Wed, Dec 06, 2023 at 10:08:39AM +0800, Tengfei Fan wrote: > Add device tree binding Documentation details for Qualcomm SM4450 > TLMM device. > > Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx> > --- > .../bindings/pinctrl/qcom,sm4450-tlmm.yaml | 151 ++++++++++++++++++ > 1 file changed, 151 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml > new file mode 100644 > index 000000000000..bb08ca5a1509 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml > @@ -0,0 +1,151 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,sm4450-tlmm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. SM4450 TLMM block > + > +maintainers: > + - Tengfei Fan <quic_tengfan@xxxxxxxxxxx> > + > +description: > + Top Level Mode Multiplexer pin controller in Qualcomm SM4450 SoC. > + > +allOf: > + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# > + > +properties: > + compatible: > + const: qcom,sm4450-pinctrl This should be qcom,sm4450-tlmm > + > + reg: > + maxItems: 1 > + > + interrupts: true > + interrupt-controller: true > + "#interrupt-cells": true > + gpio-controller: true > + > + gpio-reserved-ranges: > + minItems: 1 > + maxItems: 68 > + > + gpio-line-names: > + maxItems: 136 > + > + "#gpio-cells": true > + gpio-ranges: true > + wakeup-parent: true > + > +patternProperties: > + "-state$": > + oneOf: > + - $ref: "#/$defs/qcom-sm4450-tlmm-state" > + - patternProperties: > + "-pins$": > + $ref: "#/$defs/qcom-sm4450-tlmm-state" > + additionalProperties: false > + > +$defs: > + qcom-sm4450-tlmm-state: > + type: object > + description: > + Pinctrl node's client devices use subnodes for desired pin configuration. > + Client device subnodes use below standard properties. > + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state > + unevaluatedProperties: false > + > + properties: > + pins: > + description: > + List of gpio pins affected by the properties specified in this > + subnode. > + items: > + oneOf: > + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-5])$" > + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] > + minItems: 1 > + maxItems: 36 > + > + function: > + description: > + Specify the alternative function to be configured for the specified > + pins. > + enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2, > + atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02, > + atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c, > + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, > + cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng, > + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, > + dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c, > + jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, > + mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, > + mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, > + mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk, > + phase_flag0, phase_flag1, phase_flag10, phase_flag11, > + phase_flag12, phase_flag13, phase_flag14, phase_flag15, > + phase_flag16, phase_flag17, phase_flag18, phase_flag19, > + phase_flag2, phase_flag20, phase_flag21, phase_flag22, > + phase_flag23, phase_flag24, phase_flag25, phase_flag26, > + phase_flag27, phase_flag28, phase_flag29, phase_flag3, > + phase_flag30, phase_flag31, phase_flag4, phase_flag5, > + phase_flag6, phase_flag7, phase_flag8, phase_flag9, > + pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2, > + prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1, > + qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, > + qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, > + qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, > + qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request, > + qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, > + qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5, > + qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3, > + qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0, > + tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1, > + tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, > + uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data, > + uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1, > + vsense_trigger ] You consolidated the functions in the driver, but you forgot to update this list accordingly. > + > + required: > + - pins > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + tlmm: pinctrl@f100000 { > + compatible = "qcom,sm4450-tlmm"; Please feel free to ping me if you're having issues running dt_binding_check and dtb_check. I believe the prior should complain about this compatible being unknown. Regards, Bjorn > + reg = <0x0f100000 0x300000>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&tlmm 0 0 137>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + > + gpio-wo-state { > + pins = "gpio1"; > + function = "gpio"; > + }; > + > + uart-w-state { > + rx-pins { > + pins = "gpio23"; > + function = "qup1_se2"; > + bias-pull-up; > + }; > + > + tx-pins { > + pins = "gpio22"; > + function = "qup1_se2"; > + bias-disable; > + }; > + }; > + }; > +... > -- > 2.17.1 >
