Add DeviceTree file for Loongson-2K2000 processor, which integrates two
64-bit 3-issue superscalar LA364 processor cores.
Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
---
arch/loongarch/boot/dts/Makefile | 2 +-
.../boot/dts/loongson-2k2000-ref.dts | 72 +++++
arch/loongarch/boot/dts/loongson-2k2000.dtsi | 300 ++++++++++++++++++
3 files changed, 373 insertions(+), 1 deletion(-)
create mode 100644 arch/loongarch/boot/dts/loongson-2k2000-ref.dts
create mode 100644 arch/loongarch/boot/dts/loongson-2k2000.dtsi
diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile
index cfb0a122d91c..747d0c3f6389 100644
--- a/arch/loongarch/boot/dts/Makefile
+++ b/arch/loongarch/boot/dts/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb
+dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb loongson-2k2000-ref.dtb
obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME))
diff --git a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
new file mode 100644
index 000000000000..dca91caf895e
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k2000.dtsi"
+
+/ {
+ compatible = "loongson,ls2k2000-ref", "loongson,ls2k2000";
+ model = "Loongson-2K2000 Reference Board";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@200000 {
+ device_type = "memory";
+ reg = <0x0 0x00200000 0x0 0x0ee00000>,
+ <0x0 0x90000000 0x0 0x70000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x2000000>;
+ linux,cma-default;
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&rtc0 {
+ status = "okay";
+};
+
+&xhci0 {
+ status = "okay";
+};
+
+&xhci1 {
+ status = "okay";
+};
+
+&gmac0 {
+ status = "okay";
+};
+
+&gmac1 {
+ status = "okay";
+};
+
+&gmac2 {
+ status = "okay";
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
new file mode 100644
index 000000000000..a231949b5f55
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@1 {
+ compatible = "loongson,la364";
+ device_type = "cpu";
+ reg = <0x0>;
+ clocks = <&cpu_clk>;
+ };
+
+ cpu1: cpu@2 {
+ compatible = "loongson,la364";
+ device_type = "cpu";
+ reg = <0x1>;
+ clocks = <&cpu_clk>;
+ };
+ };
+
+ cpu_clk: cpu-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1400000000>;
+ };
+
+ cpuintc: interrupt-controller {
+ compatible = "loongson,cpu-interrupt-controller";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ bus@10000000 {
+ compatible = "simple-bus";
+ ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+ <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+ <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+ <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pmc: power-management@100d0000 {
+ compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
+ reg = <0x0 0x100d0000 0x0 0x58>;
+ interrupt-parent = <&eiointc>;
+ interrupts = <47>;
+ loongson,suspend-address = <0x0 0x1c000500>;
+
+ syscon-reboot {
+ compatible = "syscon-reboot";
+ offset = <0x30>;
+ mask = <0x1>;
+ };
+
+ syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmc>;
+ offset = <0x14>;
+ mask = <0x3c00>;
+ value = <0x3c00>;
+ };
+ };
+
+ liointc: interrupt-controller@1fe01400 {
+ compatible = "loongson,liointc-1.0";
+ reg = <0x0 0x1fe01400 0x0 0x64>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ interrupt-names = "int0";
+ loongson,parent_int_map = <0xffffffff>, /* int0 */
+ <0x00000000>, /* int1 */
+ <0x00000000>, /* int2 */
+ <0x00000000>; /* int3 */
+ };
+
+ eiointc: interrupt-controller@1fe01600 {
+ compatible = "loongson,ls2k2000-eiointc";
+ reg = <0x0 0x1fe01600 0x0 0xea00>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+ };
+
+ pic: interrupt-controller@10000000 {
+ compatible = "loongson,pch-pic-1.0";
+ reg = <0x0 0x10000000 0x0 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ loongson,pic-base-vec = <0>;
+ interrupt-parent = <&eiointc>;
+ };
+
+ msi: msi-controller@1fe01140 {
+ compatible = "loongson,pch-msi-1.0";
+ reg = <0x0 0x1fe01140 0x0 0x8>;
+ msi-controller;
+ loongson,msi-base-vec = <64>;
+ loongson,msi-num-vecs = <192>;
+ interrupt-parent = <&eiointc>;
+ };
+
+ rtc0: rtc@100d0100 {
+ compatible = "loongson,ls2k2000-rtc", "loongson,ls7a-rtc";
+ reg = <0x0 0x100d0100 0x0 0x100>;
+ interrupt-parent = <&pic>;
+ interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart0: serial@1fe001e0 {
+ compatible = "ns16550a";
+ reg = <0x0 0x1fe001e0 0x0 0x10>;
+ clock-frequency = <100000000>;
+ interrupt-parent = <&liointc>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
+ pcie@1a000000 {
+ compatible = "loongson,ls2k-pci";
+ reg = <0x0 0x1a000000 0x0 0x02000000>,
+ <0xfe 0x0 0x0 0x20000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x0 0xff>;
+ ranges = <0x01000000 0x0 0x00008000 0x0 0x18400000 0x0 0x00008000>,
+ <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
+
+ gmac0: ethernet@3,0 {
+ reg = <0x1800 0x0 0x0 0x0 0x0>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@3,1 {
+ reg = <0x1900 0x0 0x0 0x0 0x0>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ gmac2: ethernet@3,2 {
+ reg = <0x1a00 0x0 0x0 0x0 0x0>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ xhci0: usb@4,0 {
+ reg = <0x2000 0x0 0x0 0x0 0x0>;
+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ xhci1: usb@19,0 {
+ reg = <0xc800 0x0 0x0 0x0 0x0>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ display@6,1 {
+ reg = <0x3100 0x0 0x0 0x0 0x0>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ hda@7,0 {
+ reg = <0x3800 0x0 0x0 0x0 0x0>;
+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ sata: sata@8,0 {
+ reg = <0x4000 0x0 0x0 0x0 0x0>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ status = "disabled";
+ };
+
+ pcie@9,0 {
+ reg = <0x4800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 32 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@a,0 {
+ reg = <0x5000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 33 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@b,0 {
+ reg = <0x5800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 34 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@c,0 {
+ reg = <0x6000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 35 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@d,0 {
+ reg = <0x6800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 36 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@e,0 {
+ reg = <0x7000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 37 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@f,0 {
+ reg = <0x7800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 40 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+
+ pcie@10,0 {
+ reg = <0x8000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ interrupt-parent = <&pic>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &pic 30 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ };
+ };
+ };
+};
--
2.39.3
