Add a new optional input reference clock (pll1_refclk) for PLL1.
Update bindings to support dual reference clock multilink configurations.
Signed-off-by: Swapnil Jakhade <sjakhade@xxxxxxxxxxx>
---
.../devicetree/bindings/phy/phy-cadence-torrent.yaml | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
index dfb31314face..3893800f81b4 100644
--- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -35,14 +35,18 @@ properties:
minItems: 1
maxItems: 2
description:
- PHY reference clock for 1 item. Must contain an entry in clock-names.
- Optional Parent to enable output reference clock.
+ PHY input reference clocks - refclk (for PLL0) & pll1_refclk (for PLL1).
+ pll1_refclk is optional and used for multi-protocol configurations requiring
+ separate reference clock for each protocol.
+ Same refclk is used for both PLL0 and PLL1 if no separate pll1_refclk is used.
+ Optional parent clock (phy_en_refclk) to enable a reference clock output feature
+ on some platforms to output either derived or received reference clock.
clock-names:
minItems: 1
items:
- const: refclk
- - const: phy_en_refclk
+ - enum: [ pll1_refclk, phy_en_refclk ]
reg:
minItems: 1
--
2.25.1
